0
0

Forster 280 Remington No-Go Headspace Gauge, Hardened Steel

UPC: 757253004469

$38.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Headspace is one of those things you don't think about until it goes wrong, and by then it can get ugly. This Forster No-Go gauge takes the guesswork out of it for your 280 Remington. Drop it in the chamber, close the action, and you have a clear answer on whether the chamber length is where it should be. It's the same tool trusted by gunsmiths who chamber barrels for a living, and it works just as well on the bench at home.

What the 280 Remington No-Go Gauge Tells You

Forster offers three lengths per caliber: GO, NO-GO, and FIELD, running shortest to longest. The No-Go sits above the GO length and marks the maximum headspace recommended when chambering new bolt-action rifles. If your bolt closes easily on this gauge, that's a sign the chamber has more headspace than you want, and it's worth a closer look before firing. A rifle that won't close on the No-Go is right where it should be.

How the 280 Rem Headspace Gauge Is Built

These gauges are machined from A2 tool steel and held to tolerances within roughly 0.00015 inch, so you're getting a genuine reference standard rather than a rough approximation. Forster grinds them to ANSI and SAAMI dimensions, which matters because headspace on a rimless cartridge like the 280 Rem is measured off the shoulder datum, not the rim or the belt. That precision is the whole point of owning a gauge like this.

When to Reach for the No-Go Gauge

It's the go-to check when you're finishing a reamed chamber, inspecting a used rifle before you trust it, or troubleshooting brass that's showing signs of stretch. Excessive headspace can lead to case head separation and gas venting where you don't want it, while a chamber that's too tight causes its own extraction headaches. A quick check with this gauge gives you peace of mind that your 280 is safe and dialed in for accuracy.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: HG0280N
  • UPC: 757253004469
  • Caliber: 280 Remington (7mm Express)
  • Gauge Type: No-Go
  • Cartridge Type: Rimless
  • Material: A2 Tool Steel, Hardened
  • Tolerance: Within 0.00015 inch
  • Standard: ANSI / SAAMI Dimensioned
  • Length: 2.104 in
  • Color: Steel
  • Country of Origin: United States
  • Quantity: 1

What’s Included

  • One Forster 280 Remington No-Go headspace gauge (HG0280N)

Frequently Asked Questions

What does it mean if my rifle closes on the 280 Remington No-Go gauge?

If the bolt closes freely on the No-Go gauge, the chamber has more headspace than Forster recommends for a newly chambered bolt-action rifle. It doesn't automatically mean the gun is unsafe, but it's a signal to investigate further, often with a FIELD gauge to check against the maximum safe length. Many gunsmiths use this as the cutoff point when finishing a barrel.

Do I need a GO gauge along with the No-Go gauge?

For chambering a new barrel, most people run both. The GO gauge confirms the chamber is long enough to accept SAAMI-spec ammo, and the No-Go confirms it hasn't gone too long. If you're just spot-checking a used rifle, the No-Go on its own gives you a quick read on whether the headspace is in a reasonable range.

Will this gauge work for 7mm Express Remington too?

Yes. The 280 Remington and 7mm Express Remington are the same cartridge under two different names, so this HG0280N gauge covers both. You're measuring off the shoulder datum since it's a rimless case.

What is the No-Go headspace gauge made of?

Forster machines these from A2 tool steel and hardens them, then grinds them to ANSI and SAAMI tolerances within about 0.00015 inch. That level of precision is what makes it a reliable reference standard rather than a rough check. Treated well, a steel gauge like this will outlast the rifles you check with it.

Additional information

UPC

757253004469

Manufacturer

Manufacturer Part Number

HG0280N

Color

Steel

Length

2.104''

Quantity

1

Style

No Go Gauge

Reviews

There are no reviews yet.

Be the first to review “Forster 280 Remington No-Go Headspace Gauge, Hardened Steel”