Description
If you're fitting a new barrel to a 220 Swift bolt gun, this Forster No-Go gauge is the reference you check your work against. It's ground to SAAMI-based dimensions from A2 tool steel, so the number etched on the side is the number you're measuring to, no guesswork. Forster has been machining this stuff in Lanark, Illinois since 1935, and their gauges have earned a reputation for holding tolerance and staying true trip after trip into the chamber.
How the 220 Swift No-Go Gauge Fits Into a Barrel Install
The workflow is simple once you've done it. You set your headspace on the Go gauge so the stripped bolt closes with light contact, then you drop in this No-Go to confirm the bolt won't quite close. Forster's No-Go sits about .004" longer than their Go gauge, which is tighter than the SAAMI maximum of .010". That closer spacing is exactly why re-barrel shops and home smiths reach for it: you get a snug, accurate chamber rather than a sloppy one. Strip the bolt down, use a light touch on the handle, and let the gauge do the talking.
What Makes This Forster No-Go Gauge Worth Trusting
These are precision ground to ANSI and SAAMI tolerances and held to a very exacting .00015", then inspected with NIST-certified measuring tools before they ship. That kind of consistency is the whole point of a gauge. Guys who've run Forster gauges across a bunch of calibers keep coming back because the dimensions check out when they double them against their own tools.
One thing worth knowing: the No-Go is meant for setting headspace on a fresh bolt-action barrel install, not for diagnosing a factory rifle that's already assembled. If a bolt closes on a No-Go on a gun that's been together for years, it doesn't automatically mean the chamber is out of spec, just that it's longer than this gauge allows. For checking maximum headspace on an existing barrel, a Field gauge is the better call.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0220N
- UPC: 757253004247
- Caliber: 220 Swift
- Gauge Type: No-Go (Rimless)
- Material: Hardened A2 Tool Steel
- Color: Steel
- Tolerance: ±.00015"
- Standards: Ground to ANSI and SAAMI specs
- Length: 1.81"
- Quantity: 1
- Country of Manufacture: United States
What’s Included
- One Forster 220 Swift No-Go rimless headspace gauge (HG0220N)
Frequently Asked Questions
What does the 220 Swift No-Go gauge tell me?
After you've set headspace on the Go gauge, this No-Go confirms your chamber isn't too long. When you install a new barrel correctly, the stripped bolt should not close on the No-Go gauge. If it does during a barrel install, you've got more headspace than the gauge allows and want to snug the barrel in a touch more.
Do I need a Go gauge too, or is the No-Go enough on its own?
For a proper barrel install you really want both. The Go gauge sets your minimum chamber dimension so factory ammo will chamber, and the No-Go verifies you didn't go too long. Running only the No-Go leaves you guessing on the tight end, so most folks buy the pair.
Can I use this No-Go gauge to check a factory rifle that's already assembled?
Forster designs the No-Go for setting headspace on a fresh bolt-action barrel install, not for diagnosing a gun that's already together. If a bolt closes on a No-Go on an assembled rifle, it doesn't automatically mean the chamber is unsafe, only that it's longer than this closer-fitting gauge permits. For checking maximum headspace on an existing barrel, a Field gauge is the right tool.
How much headspace does the Forster No-Go allow?
Forster's No-Go runs about .004" longer than their Go gauge, which is tighter than the SAAMI maximum of .010". That closer spacing is exactly why custom and re-barrel shops favor it. You end up with a snug, accurate chamber instead of one built to the loose end of spec.




Reviews
There are no reviews yet.