0
0

Forster 308 Win National Match Bench Rest Full Length Die Set

UPC: 757253002434

$115.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster has been turning out some of the straightest, most consistent reloading dies in the game, and this 308 Winchester National Match set is a prime example. You get two dies working together: a National Match full length sizing die and the famous Forster Bench Rest seater, both packaged in Forster's Deluxe Die Box. If you're chasing tight groups out of a match rifle, this is the kind of tooling that earns its keep on the bench.

What Makes the 308 National Match Die Different

The big thing to understand here is the National Match designation. The full length sizer sizes the neck, shoulder, and body of the case, deprimes, and expands the neck in one stroke, but it sets the shoulder back about .003" from standard 308 Win dimensions. The case body diameter stays the same as a regular 308 Win die. That slight extra shoulder bump is built for chambers cut to minimum SAAMI dimensions, which is why this die is intended for bolt-action target rifles running tight match chambers. It also pairs nicely with tight-chambered M14/M1A platforms where reliable feeding matters.

How the Forster Bench Rest Seater Earns Its Name

The Bench Rest seating die is where Forster really made its reputation. The bullet, case, and seating stem are all held in the same close-fitting chamber for the entire seating stroke, which keeps everything in alignment and produces exceptionally concentric ammo. Combine that with the full length sizer's elevated E-Z Out expander ball, which lets the neck pass over the ball while most of the case is still supported inside the die, and you've got a recipe for straight, repeatable rounds.

Built Right and Ready for Any Press

Every Forster die is machined from hardened steel with one-piece reamers and hand polished before and after heat treating for a glass-smooth finish. The dies use Forster's Cross Bolt locking ring, which clamps the split ring rather than digging a hex screw into the die threads. These work in a standard 7/8-14 threaded press, and if you run a Forster Co-Ax press you won't even need a shellholder. Made in the USA, and the kind of dies that'll outlast a whole lot of brass.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 018331
  • UPC: 757253002434
  • Caliber: 308 Winchester National Match
  • Die Type: Full Length Sizer and Bench Rest Seater
  • Number of Dies: 2
  • Shoulder Setback: Reduces headspace .003" from 308 Win
  • Case Body Diameter: Same as standard 308 Win
  • Material: Hardened steel, hand polished
  • Thread Size: 7/8-14
  • Locking Ring: Forster Cross Bolt
  • Intended Use: Bolt-action target rifles
  • Country of Origin: Made in USA

What’s Included

  • National Match Full Length Sizing Die
  • Bench Rest Seater Die
  • Decapping assembly with pin and floating expander ball
  • Forster Cross Bolt die locking rings
  • Deluxe Die Box
  • Instructions

Frequently Asked Questions

What is the difference between the 308 National Match die and a standard 308 Win die?

The National Match full length sizer bumps the case shoulder back about .003" more than a standard 308 Win die, while keeping the case body diameter the same as the standard 308. That extra shoulder setback is meant for rifles with minimum-spec match chambers. A standard 308 die covers most general reloading needs, while the National Match is geared toward tight target chambers.

Does this Forster National Match die set work with gas guns like the M1A?

Forster lists this die as intended for bolt-action target rifles, but the extra shoulder bump also helps reliable feeding in tight-chambered M14/M1A rifles. It full-length sizes the body while setting the shoulder back a bit further than a standard die. If you need the case body diameter reduced as well, you'd want the 308 Small Base die instead.

Do I need a shellholder with the Forster Bench Rest die set?

If you're running a Forster Co-Ax press, no shellholder is needed since the press uses a universal jaw system. For any other 7/8-14 threaded press, you'll use the manufacturer-recommended shellholder for 308 Winchester. The shellholder is not included in this set.

What makes the Forster Bench Rest seater die produce straighter ammo?

The Bench Rest seater holds the bullet, case, and seating stem in the same close-fitting chamber through the entire seating stroke. That keeps everything aligned so the bullet goes in straight, which shows up as better concentricity and tighter groups downrange. It's a big reason Forster seaters are a favorite among precision handloaders.

Additional information

UPC

757253002434

Manufacturer

Manufacturer Part Number

018331

Reviews

There are no reviews yet.

Be the first to review “Forster 308 Win National Match Bench Rest Full Length Die Set”