0
0

Forster 308 National Match Full Length Sizing Die (018311)

UPC: 757253002427

$57.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a 308 and want brass that drops into the chamber with zero drama, this Forster National Match full length die is built for exactly that. It sizes the case neck, shoulder, and body, deprimes, and expands the neck all in a single stroke, so you get consistent, repeatable brass without juggling multiple tools. What sets the National Match version apart is the shoulder bump: it sets back the case shoulder an additional .003" compared to a standard 308 Win die, which trims headspace down to a true minimum. The case body diameter stays the same as a standard 308, so you're not over-working the brass at the base like a small base die would.

What Makes the 308 National Match Die Worth It

Forster only builds one grade of die, and it's their top-tier bench rest quality across the board. These are hand-machined with solid one-piece reamers, which is a big part of why reloaders keep coming back to them for concentricity. The vent hole is positioned up in the threaded portion of the die body so trapped air and lube can't dent your case shoulders or damage the die internals. It's a small detail that saves you a pile of ruined brass over the years.

The E-Z Out Expander Ball Advantage

The real signature feature here is the elevated E-Z Out floating expander ball system. The expander sits high in the die, so the neck passes over it while most of the case is still captured and supported. That keeps everything in alignment and cuts down on the neck runout that plagues cheaper dies. The expander ball runs .001" under bullet diameter, so after a touch of brass springback you land right around .002" of bullet grip.

Pairs With Any Standard Press

This die drops straight into a Forster Co-Ax press with no shellholder needed, and it works just as well in any standard 7/8"-14 threaded press using the right shellholder. The knurled adjustment knobs make dialing in your shoulder bump quick and tool-free. For folks running bolt guns with tight match chambers or gas guns that want a little extra sizing margin, this is a proven choice that's been earning trust at the loading bench for decades. Made in the USA.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 018311
  • UPC: 757253002427
  • Cartridge: .308 National Match
  • Die Type: Full Length Sizing Die
  • Die Series: Bench Rest
  • Gun Type: Rifle
  • Shoulder Bump: Sets shoulder back .003" from standard 308 Win
  • Case Body Diameter: Same as standard 308 Win
  • Expander Ball: E-Z Out floating, .001" under bullet diameter
  • Press Compatibility: Standard 7/8"-14 thread and Forster Co-Ax
  • Machining: Hand-machined with one-piece reamers
  • Country of Origin: Made in the USA

What’s Included

  • One Forster Full Length Sizing Die
  • One decapping assembly with decapping pin and floating expander ball
  • Forster die body ring (fits Co-Ax and standard 7/8"-14 threaded presses)
  • Die box
  • Complete instructions

Frequently Asked Questions

What's the difference between the 308 National Match die and a standard 308 Win die?

The National Match die sets the case shoulder back an additional .003" compared to a standard 308 Win die, which reduces headspace to a true minimum. The case body diameter stays the same as a standard 308, so it isn't squeezing the base like a small base die. This makes it a solid pick for match chambers and gas guns that want a bit more sizing margin for reliable feeding.

Do I need a shellholder to use this Forster die?

If you're running a Forster Co-Ax press, no shellholder is required since the press uses a universal jaw system. For any standard 7/8"-14 threaded press, you'll need the correct shellholder for the 308 case head, which is sold separately. The included die body ring works in both press types.

Is this the same quality as Forster's bench rest dies?

Yes. Forster only makes one grade of die, and it's all considered bench rest quality. Every die is hand-machined with one-piece reamers for excellent concentricity, so you're getting the same precision whether it says National Match or bench rest on the box.

What does the E-Z Out expander ball do?

The elevated E-Z Out floating expander ball sits high in the die so the case neck passes over it while most of the case is still held and supported. This keeps the neck in alignment and reduces runout. The ball runs .001" under bullet diameter, so after brass springback you end up with roughly .002" of bullet grip.

Additional information

UPC

757253002427

Manufacturer

Manufacturer Part Number

018311

Reviews

There are no reviews yet.

Be the first to review “Forster 308 National Match Full Length Sizing Die (018311)”

Related Products