0
0

Forster .270 Winchester Full Length Sizing Die (005421)

UPC: 757253000935

$57.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Full Length Sizing Die for .270 Winchester is one of those tools that quietly earns its keep on the reloading bench. It works the whole case in a single pass, sizing the neck, shoulder, and body, bumping the shoulder back to set your headspace, knocking out the spent primer, and expanding the neck so it's ready for the next bullet. The result is brass returned close to factory specs so your reloads drop into any SAAMI-spec .270 chamber with minimal play.

What Sets the Forster .270 Win Die Apart

The real story here is the elevated E-Z Out Expander Ball. Instead of yanking the neck off center on the way out, Forster positions the expander higher up so the neck stays supported by the sizing portion of the die while it passes over the ball. That keeps the case and neck in alignment and cuts down on runout, which is exactly what you want chasing tighter groups. Forster machines these dies by hand with one-piece reamers, and that attention shows up in the concentricity you get downrange.

Built to Work With Your Press

Each die carries a precisely placed vent hole in the body that lets trapped air and lube escape, so you avoid the pressure dents that can ruin good brass. The die body ring threads into any standard 7/8-14 press, and it drops right into a Forster Co-Ax without a shellholder. Running it in another brand of press? Just use the shellholder your press maker recommends.

Flexible for Full-Length or Partial Sizing

Most reloaders start their Bench Rest die collection with a full length sizer for good reason. It gives you the most flexibility. If you're loading for a single rifle, you can back the die off to partially size and hold onto those fire-formed dimensions for a glove-like fit to your chamber. Made in the USA and backed by Forster's reputation, this is a die that'll be sizing .270 brass on your bench for a long, long time.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: .270 Winchester
  • Die Type: Full Length Sizing Die
  • Die Series: Bench Rest
  • Gun Type: Rifle
  • Thread: 7/8-14 (standard press and Forster Co-Ax compatible)
  • Expander System: Elevated E-Z Out Expander Ball
  • Construction: Hand machined with one-piece reamers
  • Country of Origin: United States
  • Quantity in Set: 1 die
  • Manufacturer Part Number: 005421
  • UPC: 757253000935

What’s Included

  • One Forster .270 Winchester full length sizing die
  • Decapping/expander assembly with decapping pin and floating E-Z Out Expander Ball
  • Die body lock ring (works in Forster Co-Ax and standard 7/8-14 presses)
  • Instructions
  • Die box

Frequently Asked Questions

Does the Forster .270 Winchester sizing die require a shellholder?

It depends on your press. If you're running it in a Forster Co-Ax press, no shellholder is needed since the Co-Ax doesn't use one. For any other brand of press, use the shellholder recommended by that press maker for the .270 Winchester case head.

Will this die work in my standard reloading press?

Yes. The die uses the industry-standard 7/8-14 thread, so it threads into virtually any common single-stage or turret press. It also drops straight into a Forster Co-Ax if you run one of those.

What exactly does the full length die do to my .270 brass?

It sizes the case neck, shoulder, and body in one stroke, bumps the shoulder back to set proper headspace, deprimes the case, and expands the neck for the next bullet. That brings fired brass back close to factory dimensions so it chambers reliably in any SAAMI-spec .270 Winchester rifle.

What's the benefit of the E-Z Out Expander Ball on this Forster die?

The expander ball sits in an elevated position so the neck stays captured and supported by the die while it passes over the ball. This keeps the neck and case in alignment and reduces runout, which translates to more concentric ammo and better accuracy potential. It's a feature that comes standard on Forster's sizing dies.

Additional information

UPC

757253000935

Manufacturer

Manufacturer Part Number

005421

Reviews

There are no reviews yet.

Be the first to review “Forster .270 Winchester Full Length Sizing Die (005421)”