Description
Forster has been making some of the most respected dies in the reloading world for decades, and this .30-30 Winchester Bench Rest Full Length 2-Die Set is a big reason why. It brings together a Full Length Sizing Die and a Bench Rest Seater Die in one box, so you've got everything you need to turn fired brass into consistent, well-aligned ammo. For a cartridge like the .30-30 that lives in tube-fed lever guns, full length sizing every cycle is the way to go, and Forster's tooling makes that step clean and repeatable.
What Sets the Forster 30-30 Bench Rest Die Set Apart
The Full Length Sizing Die handles the neck, shoulder, and body in one stroke while depriming and expanding the neck. The standout is the high-mounted expander button, which pulls the case neck back over the ball with far less chance of yanking it off center, so your necks stay concentric. The dies are machined with one-piece reamers for excellent concentricity, which is a fancy way of saying your sized brass comes out straight and ready to load.
How the Bench Rest Seater Die Earns Its Name
Forster invented the straight-line seater, and reloaders still rank it among the best. The sliding die chamber captures the entire case and the bullet in the same close-fitting sleeve, holding everything in perfect alignment as the bullet is pressed home. That design is why folks measuring their loads routinely report runout down around a thousandth of an inch. Worth noting: unlike most Forster Bench Rest seaters, the .30-30 version is a crimping-style seater, which suits the roll-crimped rounds a lever gun likes.
Built for the .30-30 Reloader Who Wants It Right
Whether you're feeding a Winchester 94, a Marlin 336, or any other .30-30, this set gives you the tools to load straight, consistent rounds without fuss. Forster dies work in standard reloading presses, and if you run a Forster Co-Ax press you can skip the shellholder entirely. It all comes in Forster's Deluxe Die Box, made in the U.S.A.
Key Specifications
- Manufacturer: Forster Products
- Caliber: .30-30 Winchester
- Die Type: Bench Rest Full Length 2-Die Set
- Set Contents: Full Length Sizing Die and Bench Rest Seater Die
- Seater Style: Crimping (30-30 specific)
- Expander: Elevated expander button
- Machining: One-piece reamers for high concentricity
- Press Compatibility: Fits most standard reloading presses
- Country of Origin: United States
- Manufacturer Part Number: 004451
- UPC: 757253000478
What’s Included
- Full Length Sizing Die
- Bench Rest Seater Die
- 2 lock rings
- Instructions
- Deluxe Die storage box
Frequently Asked Questions
What comes in the Forster 30-30 Winchester Bench Rest die set?
The set includes a Full Length Sizing Die and a Bench Rest Seater Die, along with two lock rings and Forster's Deluxe Die Box. The sizing die handles the neck, shoulder, and body while depriming and expanding, and the seater presses bullets in with straight-line alignment. It's a complete two-die setup for loading .30-30 Winchester.
Does the 30-30 Bench Rest Seater Die crimp?
Yes. While most Forster Bench Rest seater dies are non-crimping, the .30-30 Winchester version is a crimping-style seater. That fits the roll-crimped rounds commonly loaded for tube-fed lever actions chambered in this cartridge.
Will these dies work in my press, and do I need a shellholder?
The dies use standard 7/8-14 threads and work in most common reloading presses. You'll need the correct shellholder for your press if it's a non-Forster unit. If you're running a Forster Co-Ax press, no shellholder is needed since the press doesn't use one.
Why choose Forster Bench Rest dies for the 30-30?
Forster invented the straight-line seater, and the sliding die chamber holds the case and bullet in perfect alignment during seating for very low runout. The full length sizing die uses an elevated expander button to keep necks concentric. Reloaders chasing consistent, accurate .30-30 ammo tend to rate these among the best available.




Reviews
There are no reviews yet.