Description
The Forster Gunsmith Screwdriver #5 is one of those tools you reach for the moment you flip a bolt rifle over and start pulling the action out of the stock. That #5 tip is ground to a 5/16" width with a 0.040" thickness, which is the sweet spot for the guard screws you'll find on Remington, Winchester, Sako, and Savage rifles. Because the tip is hollow ground with parallel faces, it seats flush against the bottom of the slot instead of camming out the way a hardware-store taper does, so you keep those screw slots clean and buggered-free.
What the Forster #5 Tip Is Built For
Guard screws take a fair amount of torque coming loose, and a rounded or wedge-shaped blade is exactly how you turn a nice screw into a marred one. The #5 blade runs about 4 inches long and is turned from hardened steel, so it holds its edge and shrugs off the twisting force these screws demand. The red plastic handle gives you a solid grip when you're leaning into a stubborn one.
Where the #5 Forster Driver Fits in the Kit
Forster numbers their drivers so each one lands on a specific family of screws, and the #5 is the guard-screw specialist. It plays well alongside the smaller #1 through #4 drivers that handle plug screws and scope mount hardware. If you already run the Forster 8-piece set, this is the same driver you'd pull from that roll, available on its own so you can replace a lost one or build your bench up a piece at a time.
Forster has been turning out gunsmithing gear in the U.S. since 1935, and these drivers carry that same made-here, single-piece construction. It's a simple tool that earns its keep every time you dismantle a rifle, and having the correct tip on hand beats forcing the wrong one every single time.
Key Specifications
- Manufacturer: Forster Products
- Driver Number: #5
- Manufacturer Part Number: 001091
- UPC: 757253000072
- Style: Parallel Tip / Hollow Ground
- Tip Width: 5/16"
- Tip Thickness: 0.040"
- Blade Length: 4"
- Blade Material: Hardened Steel
- Handle: Red Plastic
- Intended Use: Rem, Win, Sako, Savage guard screws
- Construction: Single Piece
- Country of Origin: USA
What’s Included
- Forster Gunsmith Screwdriver #5 (single driver)
Frequently Asked Questions
What screws is the Forster #5 screwdriver made for?
The #5 is Forster's guard-screw driver, sized for the wider slotted screws found on Remington, Winchester, Sako, and Savage rifles. Its 5/16" hollow ground tip fills those slots so you can apply real torque without slipping. It's the go-to when you're pulling a bolt action out of its stock.
Why choose a hollow ground tip over a regular screwdriver?
A standard screwdriver has tapered faces that wedge into the slot and cam out under pressure, which rounds off and mars screw heads. The Forster #5 has parallel, hollow ground faces that sit flat against the bottom of the slot for full contact. That's the difference between a clean screw and a chewed-up one on a firearm you care about.
Is the Forster #5 sold by itself or only in a set?
This is the single #5 driver sold on its own. It's the same driver included in Forster's 8-piece gunsmith set, so it's a handy way to replace a lost one or build your kit up one tip at a time.
What is the Forster #5 screwdriver made of?
The blade is turned from hardened steel in single-piece construction, which lets it hold its shape under the torque guard screws demand. It has a red plastic handle for grip and runs about 4 inches on the blade. Forster has been manufacturing gunsmithing tools in the USA since 1935.




Reviews
There are no reviews yet.