Description
The 277 SIG Fury runs at pressures far above what most rifle cartridges see, so the brass you feed it deserves tooling built for the job. This Lee Precision 2-die set pairs a full-length sizing die with a micrometer bullet seating die, and it's the set to grab if you're working with mixed range brass or loading for more than one rifle. The full-length sizer returns cases back to spec so they feed reliably in any chamber, which matters a lot in semi-auto and gas-driven actions.
What Sets This 277 SIG Fury Die Set Apart
The star of the show is the micrometer seating die. The thimble and body are laser engraved and read just like a precision depth micrometer, with each division representing one thousandth of an inch. That means you can record a seating depth, change bullets, and dial right back to your proven setting without guesswork. A floating bullet sleeve keeps the case mouth and bullet in alignment, which helps keep runout down and bullet-to-bullet consistency up. The seating stem is machined and burnished to handle nearly any bullet profile without scuffing or marking the point.
Sizing and Case Life With the Lee 277 Fury Dies
Lee machines its full-length sizing dies to tight tolerances and sizes to SAAMI maximum rather than minimum. The practical upshot is less overworked brass and longer case life, which is worth its weight in gold when you're handloading a cartridge as demanding as the 277 Fury. The sizer also has a built-in stuck case remover, so if a case ever hangs up, you can free it with simple hand tools instead of buying a separate kit.
Getting the Most Out of This Set
The dies use standard 7/8-14 threads, so they drop into any common single-stage or turret press. If you're loading for hunting, or your magazine length keeps the bullet off the lands, Lee's separate Factory Crimp Die is a smart add-on for tightening up your groups. Worth noting up front: SIG's hybrid composite-case ammunition is not reloadable, so this set is meant for brass-cased 277 Fury components.
Key Specifications
- Manufacturer: Lee Precision
- Cartridge: 277 SIG Fury (6.8×51)
- Set Type: Micrometer Full Length 2-Die Set
- Sizing Die: Full Length Sizing Die
- Seating Die: Micrometer Bullet Seating Die
- Micrometer Graduations: 0.001 inch per division
- Die Threads: 7/8-14
- Material: Steel
- Stuck Case Remover: Built into sizing die
- Country of Origin: United States
- Manufacturer Part Number: 92359
- UPC: 734307923594
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions
Frequently Asked Questions
Can I reload SIG's hybrid composite-case 277 Fury ammo with this die set?
No. SIG's hybrid case uses a steel head locked to a brass body, and that construction is not reloadable. This Lee 277 SIG Fury die set is designed for conventional brass-cased 277 Fury (6.8×51) components.
Why choose the full-length sizing version over a neck-sizing set?
Full-length sizing returns the case all the way back to spec, so it feeds reliably in any chamber. That makes this the right pick for semi-auto rifles, loading mixed range brass, or when you're running the same brass across more than one rifle.
What does the micrometer seating die actually do for me?
The micrometer thimble lets you set bullet seating depth in one-thousandth-inch increments and read it like a depth micrometer. Once you find a load your rifle likes, you can record the number and return to that exact setting anytime, even after switching bullets. A floating sleeve also helps keep the bullet aligned to reduce runout.
Will these dies fit my press?
Yes. The dies use the standard 7/8-14 thread found on virtually all common single-stage and turret presses, so they thread right in. The included universal shell holder covers the 277 Fury case head.



Reviews
There are no reviews yet.