Description
Dialing in seating depth is where a lot of accuracy gets won or lost, and this Lee Precision Micrometer Bullet Seating Die for the 300 Remington Ultra Magnum makes that part of the process a whole lot easier. The laser engraved micrometer thimble and body read just like a precision depth micrometer, with each division representing one thousandth of an inch. There are no clicks to count, just smooth, infinite adjustment, so you can experiment with bullet depth and come right back to a proven setting by writing down the number.
What the Floating Bullet Guide Does for Your 300 RUM Loads
The real heart of this seating die is the floating bullet guide. It holds the case mouth and bullet in alignment, and because it has radial clearance it lets the case and guide settle in perfectly with the seater screw. Lee's testing shows this sliding guide produces cartridges with the lowest bullet runout, which is exactly what you want chasing tight groups out of a big magnum like the 300 Ultra Mag. Used as a dead length seater, the die body contacts the shell holder so your seating depth stays uniform round after round.
Seating and Crimping with the 300 Remington Ultra Mag Micrometer Die
The bullet seating stem is machined and burnished to seat nearly any point style bullet without marking or damaging the tip, so it plays nice with everything from hunting soft points to long VLD-style projectiles. The floating bullet guide is also reversible. Unthread it and reinstall it the other way and you can seat and crimp in one operation, a feature that's exclusive to Lee.
Reloaders who've picked these up tend to point out the same thing: you get micrometer seating performance at a fraction of what the big-name competition dies cost, and the adjustments stay accurate even when you move between different overall lengths. It's a well-built, easy to read tool that earns a permanent spot on the bench for anyone loading the 300 Remington Ultra Magnum. Made in the U.S.A. and backed by Lee's lifetime guarantee.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92342
- UPC: 734307923426
- Cartridge: 300 Remington Ultra Magnum
- Die Type: Micrometer Bullet Seating Die
- Adjustment Increments: .001 inch divisions
- Bullet Guide: Floating, reversible for seat and crimp
- Seating Style: Dead length, body contacts shell holder
- Body: Laser engraved one piece
- Country of Origin: Made in U.S.A.
- Warranty: Lifetime guarantee
What’s Included
- 300 Remington Ultra Magnum Precision Micrometer Bullet Seating Die
- Instructions
Frequently Asked Questions
Is this a single die or a complete die set for the 300 Rem Ultra Mag?
This is a single Precision Micrometer Bullet Seating Die for the 300 Remington Ultra Magnum, not a full set. You'll still need a sizing die and the correct shell holder to complete your reloading setup. Lee does offer the micrometer seating die bundled in full length and neck sizing sets if you want everything together.
How precise is the micrometer adjustment on the seating die?
The laser engraved thimble and body read just like a precision depth micrometer, with divisions representing one thousandth of an inch. The adjustment is smooth and infinitely variable with no clicks, so you can set an exact depth and return to it later by noting the reading. Reloaders report the settings stay accurate even when switching between different overall lengths.
Will this die seat and crimp at the same time?
Yes. The floating bullet guide is reversible, so you simply unthread it and reinstall it the opposite way to seat and crimp in one operation. That convertible guide is a feature exclusive to Lee.
Does the seating stem work with different bullet shapes?
The bullet seating stem is machined and burnished to handle nearly any point style bullet without marking or damaging the tip. That makes it a good match for everything from hunting soft points to long, pointed match bullets commonly loaded in the 300 Ultra Mag.




Reviews
There are no reviews yet.