Description
The 38-40 Winchester is a classic old-timer that rewards careful handloading, and this Lee Precision micrometer seating die is built to help you get there. It replaces the guesswork of a standard seating screw with a laser-engraved micrometer thimble that reads just like a precision depth micrometer, so you can set and return to an exact seating depth with confidence. Each division represents one thousandth of an inch, and the adjustment is infinitely tunable with smooth, click-free movement.
What Sets the 38-40 Micrometer Seating Die Apart
The heart of this die is the floating bullet guide. It holds the case mouth and bullet in alignment during the stroke, and because the guide floats with radial clearance, the case, guide, and seater screw all line up on their own. Lee's own testing shows this sliding design produces cartridges with the least bullet runout, which is exactly what you want for consistent accuracy. The seating stem itself is machined and burnished to seat nearly any point-style bullet without leaving a mark on the nose, a nice touch when you're loading soft cast bullets common to the 38-40.
Seating and Crimping Flexibility with the 38-40 Die
Used as a dead length seater, the body contacts the shell holder to assure uniform seating depth round after round. The floating bullet guide is also reversible, so you can unthread it and reinstall it to seat and crimp in a single operation, which is an exclusive Lee feature. That said, the 38-40 has famously thin case necks, so many reloaders prefer to seat and crimp as separate steps to avoid buckling cases. This die gives you the option to run it either way depending on how you like to work your bench.
Built on a laser-engraved one-piece body, this die drops into any standard single-stage or progressive press and brings competition-style seating control to a cartridge that doesn't always get the fancy tooling. For anyone keeping a 38-40 lever gun or revolver fed with quality handloads, it's a genuine upgrade.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92304
- UPC: 734307923044
- Cartridge: 38-40 Winchester
- Die Type: Precision Micrometer Bullet Seating Die
- Gun Type: Rifle
- Adjustment: Laser-engraved micrometer, .001-inch divisions
- Seating Style: Dead length seating, body contacts shell holder
- Alignment: Floating bullet guide for reduced runout
- Crimp Capability: Reversible guide allows seat-and-crimp in one operation
- Body: Laser-engraved one-piece
- Press Compatibility: Standard 7/8-14 threaded presses
What’s Included
- Lee Precision 38-40 Winchester Precision Micrometer Bullet Seating Die
- Lock ring with set screw
Frequently Asked Questions
Does this 38-40 Winchester micrometer die let me return to an exact seating depth?
Yes. The laser-engraved micrometer thimble reads in one-thousandth-of-an-inch divisions, just like a precision depth micrometer, so you can record a setting and come right back to it. The adjustment is infinitely tunable with smooth movement and no detents or clicks to fight.
Can the die seat and crimp in one step?
It can. The floating bullet guide is reversible, so you simply unthread it and reinstall it to seat and crimp at the same time. Keep in mind the 38-40 has very thin case necks, so many reloaders choose to seat and crimp separately to avoid buckling cases.
Will this die mark or damage soft cast or lead bullets?
The seating stem is machined and burnished to seat nearly any point-style bullet without leaving a mark, which matters with the soft cast bullets often used in 38-40 loads. If you run an unusual bullet profile, Lee can make a custom seating stem matched to your bullet for a small fee.
Is this a complete die set or just the seating die?
This is the single Precision Micrometer Bullet Seating Die for the 38-40 Winchester, not a full set. You'll still need a sizing die and, ideally, a crimp die to load the cartridge start to finish. It fits any standard 7/8-14 threaded single-stage or progressive press.



Reviews
There are no reviews yet.