0
0

Lee Precision 38-55 Winchester Micrometer Bullet Seating Die

UPC: 734307922887

$27.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision 38-55 Winchester Micrometer Bullet Seating Die takes the guesswork out of setting bullet depth on your lever-gun loads. Instead of fussing with a wrench and screwdriver every time you change bullets, you get a laser-engraved micrometer that reads in thousandths of an inch, so you can note a setting, change to a different bullet, and dial right back to your original depth later. For anyone loading the old 38-55 WCF, that kind of repeatability is a real time-saver at the bench.

What Sets This 38-55 Micrometer Seating Die Apart

The heart of this die is the floating bullet guide. It holds the case mouth and bullet in alignment with radial clearance so the case, guide, and seater screw all self-center, which measurably cuts down on bullet runout. The seating stem is machined and burnished to seat nearly any point-style bullet without marring the nose, a nice touch when you're running cast or lead-tipped bullets common in 38-55. Because it works as a dead-length seater, the body contacts the shell holder to give you consistent, uniform seating depth round after round.

Dialing In Your 38-55 Winchester Loads

The micrometer adjustment is smooth with no clicks, just clean rotation and a scale that reads like a precision depth micrometer. One handy feature exclusive to Lee is the reversible bullet guide: unthread it and reinstall it the other way and you can seat and crimp in a single operation if your setup calls for it. The 38-55 lives in tubular-magazine lever guns, so a solid crimp matters for keeping bullets from backing into the case under recoil, and this die gives you flexibility in how you handle that step.

A Smart Pick for the 38-55 Reloader

This is a single bullet seating die built on the standard 7/8-14 thread, so it drops right into any common single-stage or turret press. Reloaders who've run Lee's micrometer seaters tend to praise how the setting holds once dialed in, even across long loading sessions. If you want cleaner, more consistent 38-55 ammo without stepping up to a premium-priced die, this one earns its spot.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92288
  • UPC: 734307922887
  • Cartridge: 38-55 Winchester (38-55 WCF)
  • Die Type: Micrometer Bullet Seating Die
  • Gun Type: Rifle
  • Thread Size: 7/8-14
  • Micrometer Graduations: 0.001 inch divisions
  • Body: Laser engraved one-piece
  • Bullet Guide: Floating, reversible for seat-and-crimp
  • Seating Style: Dead length

What’s Included

  • Lee Precision 38-55 Winchester Micrometer Bullet Seating Die
  • Storage box

Frequently Asked Questions

Does the 38-55 Winchester micrometer die seat and crimp at the same time?

It can. The floating bullet guide is reversible, so you simply unthread it and reinstall it the other way to seat and crimp in one operation, a feature exclusive to Lee. Many reloaders prefer to seat and crimp as separate steps for best consistency, and this die lets you do it either way.

Will this die work with cast or lead bullets in 38-55?

Yes. The seating stem is machined and burnished to seat nearly any point-style bullet without damaging or marking the nose, which is a real benefit with the soft cast and lead-tipped bullets often used in 38-55 WCF. If you run an unusual bullet profile, Lee can make a custom seating stem to match.

What press does the Lee 38-55 micrometer seating die fit?

It uses the standard 7/8-14 die thread, so it threads into any common single-stage, turret, or progressive press. This is a single seating die rather than a full set, so you'll pair it with your sizing and crimp steps as needed.

How precise is the micrometer adjustment?

The laser-engraved micrometer thimble and body read in 0.001 inch divisions, just like a precision depth micrometer. Adjustment is smooth with no clicks, and once you set it, the reading holds so you can return to an exact seating depth any time you switch bullets and come back.

Additional information

UPC

734307922887

Manufacturer

Manufacturer Part Number

92288

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 38-55 Winchester Micrometer Bullet Seating Die”