Description
The Lee Precision Micrometer Bullet Seating Die chambered for 25-06 Remington takes the guesswork out of seating depth. Instead of wrestling with a lock nut and screwdriver, you adjust the micrometer thimble and read the change right off the engraving, which means you can experiment with depth, write down your settings, and come back to the exact same spot every time. For anyone chasing that sweet spot off the lands with their 25-06 handloads, that kind of repeatability is a big deal.
What Sets This 25-06 Micrometer Seating Die Apart
The laser-engraved micrometer thimble and body read just like a precision depth micrometer, with divisions marking one thousandth of an inch at a time. It is infinitely adjustable, so there are no detents or fixed steps to work around. Set it, record it, and your next session picks up right where you left off.
Alignment and Runout on 25-06 Remington Loads
The case mouth and bullet are held in alignment by a floating bullet guide. That guide is built with radial clearance so the case and guide can self-center with the seater screw, and Lee's testing points to this sliding guide design producing some of the lowest bullet runout you can get. The seating stem itself is machined and burnished, so it will seat nearly any point style bullet without marring the tip. Run it as a dead length seater and the die body contacts the shell holder, which locks in consistent, uniform seating depth round after round.
A Nice Touch for 25-06 Reloaders
The floating bullet guide is reversible. Unthread it, flip it, and reinstall it, and you can seat and crimp in the same step, which is a Lee exclusive feature. Made in the USA and backed by Lee's reputation for giving you real precision without the eye-watering price tag some of the competition carries.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92272
- UPC: 734307922726
- Cartridge: .25-06 Remington
- Die Style: Bullet Seating Die
- Adjustment: Laser-engraved micrometer, .001 inch divisions
- Seating Type: Dead length, infinitely adjustable
- Bullet Guide: Floating, reversible for seat-and-crimp
- Seating Stem: Machined and burnished
- Country of Origin: USA
- Shipping Weight: 0.27 lb
What’s Included
- Lee Precision 25-06 Rem Precision Micrometer Bullet Seating Die
Frequently Asked Questions
Does this 25-06 micrometer seating die let me return to an exact seating depth?
Yes, that is the whole point of the micrometer design. The laser-engraved thimble reads in one thousandth of an inch increments, so you can record your settings and dial right back to them on a later session. It takes the trial-and-error out of adjusting seating depth.
Can the Lee 25-06 micrometer die seat and crimp at the same time?
It can. The floating bullet guide is reversible, so you simply unthread it, flip it, and reinstall it to seat and crimp in one step. That reversible guide is a feature exclusive to Lee.
Will this seating die mark or damage my bullet tips?
No. The seating stem is machined and burnished to seat nearly any point style bullet without damage or marking. It handles a wide range of bullet profiles commonly loaded in 25-06 Remington.
Is this a complete die set or just the seating die?
This is the bullet seating die only, not a full set. You will still need a sizing die to complete your 25-06 Remington reloading setup. Many reloaders pair it with a Lee full length or neck sizing die depending on their goals.




Reviews
There are no reviews yet.