Description
Loading 8.6 Blackout means working with heavy .338 projectiles across a wide spread of weights, and seating depth matters a lot when you're chasing subsonic consistency. This Lee Precision Micrometer Precision Bullet Seating Die is built to take the guesswork out of that step. The micrometer head lets you make fine, repeatable adjustments to seating depth, so once you find your load you can come right back to it round after round. It carries Lee part number 92237, and if you've seen it listed as 92153 in the past, that's the same die under its older number.
What the Floating Bullet Guide Does for Your 8.6 BLK Loads
The heart of this seater is a floating bullet guide that holds the case mouth and bullet in alignment while the seating stem does its work. The guide has a little radial clearance so the case and bullet self-center with the seating screw, which is what keeps runout low and concentricity tight. The seating screw itself is machined and burnished so it seats pretty much any bullet profile without scuffing or marking the nose. For a cartridge that lives and dies on consistency, that kind of alignment is worth its weight.
Dead Length Seating with the 8.6 Blackout Micrometer Die
This die runs as a dead length seater, meaning the die body contacts the shell holder to give you uniform, repeatable seating depth every stroke. The 8.6 Blackout is built on a shortened, necked-up 6.5 Creedmoor case running .338 bullets, typically 285 to 342 grains on the subsonic side and lighter weights when you go supersonic. Those long, heavy bullets reward a seater that stays precise, and the micrometer adjustment makes load development a lot less fiddly when you're testing seating depth against different projectiles.
It's a standard 7/8-14 threaded die that drops into any common single stage or progressive press, so it fits right into whatever bench setup you're already running for your 8.6 builds.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92237
- UPC: 734307922375
- Cartridge: 8.6 Blackout
- Die Style: Micrometer Precision Bullet Seating Die
- Seating Type: Dead length with floating bullet guide
- Adjustment: Micrometer seating depth
- Thread Size: 7/8-14
- Former Part Number: 92153
- Country of Origin: United States
What’s Included
- 8.6 Blackout Micrometer Precision Bullet Seating Die
- Die lock ring
Frequently Asked Questions
What makes the 8.6 Blackout Micrometer Bullet Seating Die different from a standard seater?
The big difference is the micrometer adjustment head, which lets you set and return to an exact seating depth without trial and error. It also uses a floating bullet guide that aligns the case mouth and bullet for lower runout than a typical seating die. That combination is why these are a favorite for anyone chasing consistency in their 8.6 BLK loads.
Will this die work on my press?
Yes. It's a standard 7/8-14 threaded die, so it threads into any common single stage, turret, or progressive press. If your press loads standard rifle cartridges, this seater will drop right in.
Is this a full die set or just the seating die?
This is the bullet seating die only, part number 92237. If you want a complete setup, Lee offers it inside the 8.6 Blackout Pacesetter and Micrometer die sets that add a sizing die and factory crimp die. Many reloaders buy this seater on its own to upgrade a set they already own.
Does it handle the heavy .338 subsonic bullets used in 8.6 Blackout?
It does. The 8.6 Blackout runs .338 bullets commonly in the 285 to 342 grain range for subsonic loads, and the burnished seating stem is designed to seat those long projectiles without marking the nose. The micrometer head makes it easy to fine-tune depth as you work between different bullet profiles.





Reviews
There are no reviews yet.