0
0

Lee Precision C266-140-RF Double Cavity Bullet Mold 6.5mm 140gr

UPC: 734307920326

$33.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision C266-140-RF is a two cavity bullet mold built for folks who want to roll their own 6.5mm projectiles at home. It drops a .266 diameter, 140 grain round nose with a flat point, which makes it a solid match for 6.5 Creedmoor and other 6.5mm rifle cartridges. Lee lists the finished bullet at 1.100 inches overall length with a ballistic coefficient of .333, and the distance from the nose to the first lube groove runs .740 inches.

Why the C266-140-RF Mold Casts So Clean

Lee machines these mold blocks from aluminum instead of iron or steel, and that choice pays off at the lead pot. Aluminum heats up and cools down quicker, so you can usually start dropping good bullets after just a few casts. It also weighs about a third of what a steel block does, which your arm will appreciate during a long casting session. The blocks are CNC machined for roundness and consistent sizing, and the aluminum won't rust the way cast iron can if it sits in the shop.

Running Two Cavities at Once

Two cavities means you're pulling two bullets per pour, so you build up a batch faster than you would with a single cavity setup. Weights given are based on Lee's suggested alloy, so your real-world weight can shift a little depending on the lead mix you're running. This is a gas check design, so plan on seating gas checks as part of your process to protect the base at rifle velocities.

What the C266-140-RF Mold Is Good For

If you're shooting 6.5 Creedmoor on a budget or just enjoy the self-reliance of casting your own, this mold gets you into cast 6.5mm bullets without a big investment. It's a popular pick with reloaders who want quality results from an affordable tool, and since the handles are already included, you're one lead pot and some alloy away from making bullets.

Key Specifications

  • Manufacturer: Lee Precision
  • Model: C266-140-RF
  • Manufacturer Part Number: 92032
  • UPC: 734307920326
  • Caliber: 6.5mm / 6.5 Creedmoor
  • Bullet Diameter: 0.266 in
  • Bullet Weight: 140 Grains
  • Bullet Design: Round Nose with Flat Point
  • Cavities: 2 (Double Cavity)
  • Block Material: Aluminum
  • Bullet Overall Length: 1.100 in
  • Ballistic Coefficient: 0.333
  • Nose to First Lube Groove: 0.740 in
  • Gas Check: Gas Check Design
  • Country of Origin: United States

What’s Included

  • Lee C266-140-RF double cavity mold blocks
  • Mold handles
  • Anodized sprue plate

Frequently Asked Questions

What cartridges can I load with the C266-140-RF mold?

This mold casts a .266 diameter, 140 grain bullet sized for 6.5mm rifle cartridges, with 6.5 Creedmoor being the most common pairing. Any 6.5mm chambering that runs a .264 to .266 bullet is worth looking at for this projectile. As always, work up your loads carefully for the rifle you're shooting.

Does the Lee 6.5mm mold come with handles?

Yes. Lee includes handles with every double cavity mold, along with a hard anodized sprue plate. You'll just need a lead pot, your alloy, and a gas check setup to get casting.

Why aluminum instead of a steel or iron mold block?

Aluminum heats up and cools down faster than iron or steel, so you can usually start dropping good bullets after only a few casts. The blocks are also about a third of the weight, which cuts down on fatigue during long sessions, and they won't rust sitting in the shop. Lee CNC machines the halves for consistent roundness and sizing.

Is this a gas check bullet?

Yes, the C266-140-RF is a gas check design, which means you'll seat a gas check on the base before loading. Gas checks help protect the bullet base at rifle velocities and keep leading down in the bore. Plan on adding a gas check seating step to your casting and sizing routine.

Additional information

UPC

734307920326

Manufacturer

Manufacturer Part Number

92032

Bullet Weight (Grains)

140

Shipping Weight

0.6875

Reviews

There are no reviews yet.

Be the first to review “Lee Precision C266-140-RF Double Cavity Bullet Mold 6.5mm 140gr”