Description
If you shoot a .50 caliber muzzleloader and go through round balls faster than you'd like to buy them, casting your own is the move, and this Lee Precision six-cavity mold makes it worth the effort. It produces six .490 diameter balls per pour at a nominal 176.61 grains, which is the standard patched round ball size for most .50 caliber flintlock and percussion rifles. Multiply that across a casting session and you can turn out hundreds of balls per hour once the blocks are up to temperature.
What Makes the Lee .490 Six-Cavity Mold Tick
The blocks are machined from aluminum, which is the real advantage here. Aluminum heats up and cools down far quicker than iron or steel, so you'll be dropping good balls after only a few casts instead of fighting a cold mold. The blocks are also a fraction of the weight of steel, which your forearm will thank you for during a long session at the pot. To keep every ball round and consistent, the halves are clamped together and bored as a unit for tight size control.
Casting Clean Balls With the Lee 91711 Mold
The sprue plate uses a cam-action assist that makes cutting all six sprues in one motion smooth and easy, and the alloy plate is designed to shed solder smears rather than collect them. Round ball molds like this one use a tangential cut-off that eliminates the little nib at the sprue, so you get a cleaner ball with less fuss. Lee blocks are known for releasing cleanly too, usually a light tap on the handle pivot and the balls drop right out.
Keep in mind the six-cavity mold blocks require Lee commercial mold handles, which are sold separately. Aluminum blocks are softer than blued steel, so handle them gently during that first break-in period and treat them with a little care, and they'll keep dropping good balls for a very long time.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 91711
- UPC: 734307917111
- Caliber: .50 Caliber
- Ball Diameter: .490 in
- Ball Weight: 176.61 grains
- Bullet Style: Round Ball
- Cavities: 6
- Block Material: Aluminum
- Sprue Plate: Cam-action assist
- Country of Origin: United States
What’s Included
- Lee Precision .490 six-cavity round ball mold blocks with cam-action sprue plate
- Handles sold separately
Frequently Asked Questions
Does the Lee .490 6-cavity mold come with handles?
No, the six-cavity mold blocks require Lee commercial mold handles, which are sold separately. You'll need a set of handles to open, close, and operate the mold before casting. Lee's commercial handles for six-cavity molds are the standard fit for this block.
What caliber is the .490 round ball used for?
The .490 diameter ball is the common patched round ball size for .50 caliber muzzleloading rifles, including flintlock and percussion guns. The nominal weight is 176.61 grains. Exact fit depends on your patch thickness and bore, so match it to what your rifle likes.
Why choose an aluminum mold over steel for casting round balls?
Aluminum blocks heat up and cool down much faster than iron or steel, so you can start dropping quality balls after just a few casts. They're also roughly a third of the weight, which cuts down on arm fatigue during long sessions. Just handle them with a bit more care since aluminum is softer than blued steel.
How many round balls does this Lee mold cast at once?
This mold has six cavities, so it drops six .490 round balls with every pour. Once the blocks come up to temperature and you get into a rhythm, you can turn out hundreds of balls per hour. The cam-action sprue plate makes cutting all six sprues in one smooth motion quick and easy.




Reviews
There are no reviews yet.