Description
Casting your own big-bore bullets is only half the job. Getting them to a consistent, correct diameter is what makes them shoot well and chamber right, and that's exactly what this Lee Classic Bullet Sizing Kit handles. It brings cast bullets down to a true .458" diameter, and it does it the simple push-through way that Lee is known for. Bullets go through the die nose first, so there's no fussing with mold-specific top punches, and sized bullets drop straight into the included red catch container that doubles as a storage case for the die.
What the .458" Sizing Kit Does on the Press
The steel sizing die uses standard 7/8×14 threads, so it screws into pretty much any single-stage press you've already got on the bench. The bullet punch installs into the ram and fits rams that take standard shell holders. You lube your bullets first with Lee Liquid Alox, set one on the punch, and run it up through the die. Along the way, gas checks get seated and crimped in place automatically, which saves a separate step for anyone loading gas-checked designs.
Picking the Right Size for Your Barrel
The .458" diameter covers a lot of popular ground, from .45-70 Government and .458 cartridges to other heavy cast loads. A good rule of thumb for cast bullets is to size about .001" over your groove diameter, so measure before you commit to a size. Sizing isn't always strictly required, but it's the fix when your as-cast bullets are too fat to chamber cleanly, and it tends to tighten up accuracy by making every bullet uniform.
A Few Things Worth Knowing
This is the sizing die kit only. You'll need a reloading press and Lee Liquid Alox lube, both sold separately, to put it to work. Lee also recommends giving bullets a light re-lube after sizing so the freshly sized surface stays coated. It's a straightforward, budget-friendly tool that earns its spot for anyone running cast bullets in a big-bore rifle or handgun.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91682
- UPC: 734307916824
- Bullet Diameter: .458"
- Die Thread: 7/8×14 (fits standard presses)
- Die Material: Steel
- Function: Sizes cast bullets, seats and crimps gas checks
- Press Type: Single-stage / standard reloading press
- Catch Container: Red plastic container included (doubles as die storage)
- Lube Required: Lee Liquid Alox, sold separately
- Shipping Weight: 0.625 lbs
- Country of Origin: United States
What’s Included
- Steel .458" sizing die (7/8×14 thread)
- Bullet push-through punch
- Red plastic catch container that doubles as die storage
Frequently Asked Questions
Do I need anything else to use the .458" sizing kit?
Yes. You'll need a reloading press and Lee Liquid Alox bullet lube, both sold separately. The kit itself includes the steel sizing die, the push-through punch, and the red catch container.
What presses does this bullet sizing kit fit?
The sizing die uses standard 7/8×14 threads, so it fits just about any press that accepts standard threaded dies. The bullet punch installs in the ram and works with rams that take standard shell holders. It's designed for single-stage press use.
Can this kit seat gas checks?
It can. When you push a gas-checked bullet through the die, the gas check is seated and crimped in place automatically. Just set the gas check on the base of the bullet before running it up through the die.
What diameter should I size my cast bullets to?
This kit sizes to .458". A common guideline for cast bullets is to choose a size about .001" larger than your barrel's groove diameter, so slug your bore and measure before deciding. Sizing helps bullets chamber freely and keeps them uniform for better accuracy.



Reviews
There are no reviews yet.