Description
The Lee Precision 28 Nosler Custom Factory Crimp Die is the finishing touch for anyone building serious long-range hunting or target loads in this fast magnum. This is a custom over-run die from Lee's Hartford, Wisconsin shop, and it does one job extremely well: it squeezes the case mouth firmly onto the bullet for a crimp that holds like factory ammunition. For a hard-recoiling magnum like the 28 Nosler, that kind of bullet grip pays off.
How the 28 Nosler Factory Crimp Die Works
Unlike a standard roll crimp built into a seating die, this is a collet-style rifle die. A split collet closes in from four sides and presses a segmented crimp into the case mouth without putting downward strain on the case. That design makes it close to impossible to buckle a case, even if your trim lengths vary a little. One of the nice things about the collet setup is that your bullets don't need a cannelure or crimp groove. The collet will form its own grip right where it needs to.
Why Reloaders Reach for the Lee 28 Nosler Crimp Die
A firm crimp isn't just about holding the bullet in place. Pressure has to build to a higher level before the bullet starts to move, which creates a more uniform pressure curve and tightens up velocity spreads shot to shot. Handloaders who've run the Factory Crimp Die on bottleneck rifle rounds often report noticeably more consistent groups and lower extreme spreads, even with match bullets that have no crimp groove. It's a simple, repeatable way to add consistency without chasing seating depth against the lands.
This die threads into any standard reloading press and runs as a separate station after your seating die, so it drops right into a turret or single-stage setup. Handles come included, and like most Lee tooling, it's built to last through plenty of loading sessions. If you're loading the 28 Nosler for elk country or the long line, this is an easy upgrade to your bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91236
- Model Number: 91236
- UPC: 734307912369
- Caliber: 28 Nosler
- Die Type: Collet-Style Factory Crimp Die
- Category: Reloading Dies
- Crimp Style: Segmented collet crimp for bottleneck cases
- Press Compatibility: Standard reloading presses
- Country of Manufacture: United States
- Weight: 0.30 lbs
What’s Included
- Lee 28 Nosler Custom Factory Crimp Die
- Die handles/adjustment hardware
- Instruction sheet
Frequently Asked Questions
Does the 28 Nosler Factory Crimp Die seat the bullet too?
No, this die only crimps. You still need to seat your bullets with a separate seating die first, then run the loaded round through the Factory Crimp Die as a final step. It installs as its own station in your press, which makes it a natural fit for a turret or single-stage setup.
Do my bullets need a cannelure or crimp groove to use this die?
They don't. The collet design presses in from the sides and forms its own grip on the bullet, so even smooth match bullets with no crimp groove can be crimped. Many reloaders use it exactly for that reason since it adds consistency to premium hunting and target bullets.
Will this die buckle my 28 Nosler cases?
The collet style is built to avoid that. Because the collet squeezes the case mouth inward rather than pushing down on the case, it won't buckle brass the way a standard roll crimp can if you get aggressive. You can dial in a light or heavier crimp without worrying about collapsing a case.
What does a firm crimp actually do for accuracy?
A firm, consistent crimp forces chamber pressure to build higher before the bullet releases, which smooths out the pressure curve and tightens velocity spreads from shot to shot. That often translates to better groups downrange. It's a simple way to add repeatability to your 28 Nosler handloads.




Reviews
There are no reviews yet.