Description
This is the standalone full length sizing die from Lee Precision in 7mm-08 Remington, part number 91061. It's the single most-used die in most reloading routines, handling the resize and deprime in one stroke. When you fire a case, the brass swells to fit your chamber and doesn't spring all the way back. This die squeezes the body and neck back down to minimum dimensions so the round chambers smoothly and feeds reliably, whether you're loading brass fired in your own rifle or a mixed bag of once-fired cases.
What the Lee 7mm-08 Sizing Die Handles
Because it works the full case rather than just the neck, this die is the right pick for range pickups, mixed headstamps, and anything that needs to run in more than one 7mm-08 chamber. It deprives the spent primer during the same stroke that sizes the case, so you're knocking out two steps at once. Reloaders swapping over from other brands tend to notice how smoothly the Lee runs on the press.
Fit, Thread, and Setup Notes
The die body is machined steel and uses the standard 7/8-14 thread, so it threads straight into any common single stage or turret press. One thing worth knowing up front: steel sizing dies need case lube. Give your brass a light coat before running it in, or you risk a stuck case. Setup is simple, run the ram up with a lubed case and adjust the die down until the shoulder gets bumped back right around a thousandth, then lock the ring.
Sold as a Single Die
This listing is for the sizing die by itself, not a full set. It does not include a shell holder, seating die, or powder dipper, so if you're starting fresh you'll want to pair it with a seating die and the correct shell holder. For folks building or rounding out a 7mm-08 bench, it's a dependable piece that'll outlast a lot of your other gear. Lee has been turning out affordable, well-made reloading tools since 1958, and this die carries that reputation.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 91061
- UPC: 734307910617
- Cartridge: 7mm-08 Remington
- Die Style: Full Length Sizing Die
- Die Material: Steel
- Thread Size: 7/8-14
- Type: Rifle Reloading Die
- Shell Holder Included: No
- Country of Origin: USA
What’s Included
- 7mm-08 Remington full length steel sizing die (one die)
Frequently Asked Questions
Does the 7mm-08 full length sizing die deprime the case too?
Yes. This die resizes the full case and removes the spent primer in the same stroke of the press. You get both jobs done in one pull, which keeps your process quick.
Do I need case lube with this Lee sizing die?
You do. This is a steel sizing die, so your brass needs a light coat of resizing lubricant before you run it through. Skipping lube with a steel die can leave a case stuck in the die, so lube is worth the extra minute.
Is a shell holder or seating die included with part 91061?
No. This listing is the sizing die on its own, not a complete set. You'll want to add the correct shell holder and a seating die if you're building a 7mm-08 setup from scratch.
Will this die work on brass fired in a different 7mm-08 rifle?
Absolutely. Because it sizes the full body and neck of the case, it brings brass back to minimum dimensions regardless of which rifle fired it. That makes it the right choice for mixed range brass and once-fired cases from other guns.





Reviews
There are no reviews yet.