Description
If you shoot a .300 H&H or .300 Weatherby Magnum bolt gun and you're chasing tighter groups, this is the die that gets you there without a lot of fuss. The Lee collet neck sizing die uses a steel collet to squeeze your fired case neck against a precision mandrel, giving you a straight, concentric neck with minimal runout. Because it only touches the neck and leaves the body alone, your brass stays fire-formed to your particular chamber, which is exactly what you want when accuracy is the goal.
What the .300 H&H / .300 Weatherby Collet Die Does Differently
Most sizing dies work the whole case body and need lube to keep from sticking. This one skips all that. The collet-and-mandrel design means no case lube, no gummy residue to clean off, and no lube dents. That alone saves a step and keeps your brass clean. The neck gets sized from the outside in against a fixed mandrel, so you're setting neck dimensions off a known reference rather than hoping a sizing ball pulls through straight.
Why Handloaders Reach for This .300 Collet Neck Die
Two things stand out for precision-minded reloaders: accuracy and brass life. Fire-formed cases that only get neck sized chamber snugly and tend to shoot tighter, and since you're not overworking the brass, cases can last several times longer before they need trimming or start splitting. Less work hardening on the neck also means fewer annealing sessions. For a big belted magnum like the .300 H&H or the hard-hitting .300 Weatherby, where quality brass is worth hanging onto, that longevity adds up fast.
Keep in mind this die is meant for brass that's been fired through your own rifle. If you're working with new, once-fired factory, or mixed range brass, you'll want to full-length size first, then this collet die earns its keep on every load after. It's a single neck sizing die, not a full set, so you'll pair it with a seating die to finish your rounds.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91020
- UPC: 734307910204
- Cartridge: .300 H&H Magnum / .300 Weatherby Magnum
- Die Type: Collet Neck Sizing Die
- Sizing Method: Steel collet squeezes case neck against precision mandrel
- Case Lube Required: No
- Quantity: 1 die
- Gun Type: Rifle
- Country of Origin: United States
- Item Weight: Approximately 0.45 lbs
What’s Included
- Lee .300 H&H / .300 Weatherby Magnum collet neck sizing die
- Storage box
Frequently Asked Questions
Does this collet neck sizing die fit both .300 H&H and .300 Weatherby Magnum?
Yes, this single die is designed to neck size both .300 H&H Magnum and .300 Weatherby Magnum brass. Lee builds it for the shared neck dimensions of these two cartridges. It's a nice bonus if you happen to load for both.
Do I need case lube with the Lee collet die?
No. The collet design squeezes the neck against an internal mandrel rather than forcing the whole case body through a die, so no lubrication is required. That means no messy lube step and no residue to clean off your brass afterward.
Can I use this die on new or range-pickup brass?
This collet die is meant for cases that have already been fired through your own rifle, since neck sizing preserves the fire-formed body dimensions. For new, mixed, or once-fired factory brass, run it through a full-length sizing die first. After that, the collet die is all you need for sizing on repeat loads.
Is this a full die set or just the sizing die?
This is the collet neck sizing die only, not a complete set. You'll want to pair it with a bullet seating die to finish your loaded rounds. Many precision reloaders run exactly this setup for bolt action accuracy work.




Reviews
There are no reviews yet.