Description
This is the Lee Precision collet neck sizing die chambered for 6.5x55mm Swedish Mauser, the setup a lot of handloaders reach for once they've got a stash of brass fired through their own rifle. Instead of working the whole case, a steel collet squeezes the neck against a precision ground mandrel. That gives you a cleanly aligned neck with very little runout, which is a big part of why collet-sized ammo tends to group so well.
How the 6.5×55 Collet Neck Sizing Die Works
The magic here is that it only touches the neck. The case body stays fire formed to your chamber, so the brass drops right back into the gun it came out of with that near-perfect fit intact. Because you're not stretching and squeezing the whole case every cycle, your brass holds up a lot longer. Lee notes that neck-sized cases can last up to around ten times longer than full length sized ones, which adds up quick when you're feeding a 6.5 Swede. One of the nicest parts is that no case lube is required, so there's no greasy mess to wipe off and no lube dents to worry about.
Who the Lee 6.5×55 Swedish Collet Die Suits
This die shines for bolt action rifles where you're reloading brass that has only ever been fired in that one gun. Neck sizing isn't the right call for autoloaders, slide actions, or lever guns, and it's not meant for mixing brass between different rifles. If that's your situation, a full length die is the better tool. For the precision-minded bolt gun owner chasing tight groups and long brass life, though, this is hard to beat.
Fit and Build
The die is made in the U.S.A. and uses the standard 7/8"-14 thread, so it threads straight into any common single stage or turret press. Worth knowing: in 2019 Lee updated the collet so a small portion of the neck protrudes past the sizing section, a change longtime users had asked for. It's a simple, well-made piece that does one job and does it well.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91009
- UPC: 734307910099
- Caliber: 6.5x55mm Swedish Mauser
- Die Type: Collet Neck Sizing Die
- Thread Size: 7/8"-14
- Sizing Method: Steel collet squeezing neck against precision mandrel
- Case Lube Required: No
- Gun Type: Rifle
- Country of Manufacture: United States
What’s Included
- Lee Precision 6.5×55 Swedish Mauser collet neck sizing die
- Custom fit plastic storage container
- Instructions
Frequently Asked Questions
Does the 6.5×55 collet neck sizing die need case lube?
No, it doesn't. The collet design sizes only the neck, so there's no lube required at any point. That means no greasy cleanup afterward and no lube dents in your brass.
Can I use this die for brass fired in different rifles?
It's meant for cases that have only been fired in your own rifle. Neck sizing leaves the case body fire formed to that specific chamber, so the brass should go back into the same gun. If you're loading mixed range brass or new brass, a full length sizing die is the better choice.
Is the Lee collet die okay for semi-autos or lever guns?
Neck sizing is recommended for bolt action and other repeating rifles, not for autoloaders, slide actions, or lever guns. Those actions generally need the more complete sizing a full length die provides for reliable feeding. For a bolt gun chasing accuracy, this collet die is a great fit.
Does this die fit a standard reloading press?
Yes. It uses the common 7/8"-14 thread, so it screws right into any standard single stage, turret, or progressive press. No adapters or special hardware needed.




Reviews
There are no reviews yet.