Description
Finding factory ammo for the old 8x56mm Rimmed Hungarian can be a real headache, which is exactly why a mold like this earns its keep on the casting bench. This Lee Precision double cavity mold drops a 205-grain round nose bullet sized for .329" to .330" bores, giving owners of the Steyr-Mannlicher M95 and similar rifles a steady supply of projectiles without chasing down hard-to-find loaded rounds. Lee's designation for this one is C330-205-1R, with the 1R referring to the single ogive radius that shapes that classic round nose profile.
The blocks are machined from aluminum, which is a big part of what makes Lee molds so friendly for home casters. Aluminum heats up quickly, cools down fast between pours, and shrugs off rust better than iron or steel. It also weighs about a third of what a steel block does, so your hands and wrists hold up a lot longer during a long casting session. The cavities are CNC machined for consistent roundness, and the hard anodized sprue plate uses a tangential cut-off that helps clean up the nip at the base of each bullet.
Why the 8mm Lee Double Cavity Mold Makes Sense
Being a two-cavity setup, you get two bullets every time you fill and cut the sprue, which doubles your output compared to a single cavity without slowing you down. Round nose bullets in this weight class feed and shoot well in the old military rifles these were built around, and casting your own lets you tune your alloy to the velocity you're running. Lee's stated 205-grain weight is based on their suggested alloy, so your real-world weight will shift a little depending on your lead-tin mix.
Getting the Most From This 8mm Round Nose Mold
The mold comes with hardwood handles included, so you're ready to pour once you've got a melting pot and alloy. This design is set up for a gas check base, which lets you push these bullets to higher velocities than a plain base would allow when you crimp a check on during sizing. A little mold prep and a properly fluxed pot go a long way toward clean, filled-out bullets right from the first few pours.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90775
- Mold Designation: C330-205-1R
- UPC: 734307907754
- Caliber: 8mm
- Bullet Diameter: 0.330" (formerly .329")
- Bullet Weight: 205 Grains
- Bullet Style: Round Nose (1 Ogive Radius)
- Cavities: 2 (Double Cavity)
- Base Type: Gas Check
- Block Material: Machined Aluminum
- Sprue Plate: Hard Anodized
- Bullet Overall Length: 1.039 inches
- Ballistic Coefficient: 0.361
- Intended Cartridge: 8x56mm Rimmed Hungarian
- Country of Manufacture: United States
What’s Included
- Lee Precision double cavity bullet mold (8mm, 205gr round nose)
- Hardwood handles
- Hard anodized sprue plate
Frequently Asked Questions
What cartridge is this 8mm double cavity mold made for?
This mold casts a 205-grain round nose bullet in roughly .330" diameter, which is built around the 8x56mm Rimmed Hungarian used in Steyr-Mannlicher M95 rifles. Since factory ammo for that chambering is tough to come by, casting your own is a popular way to keep these rifles fed. The diameter was updated from .329" to .330" by Lee back in 2019.
Does the mold take a gas check?
Yes, this is a gas check design, which is reflected in the C prefix of its C330-205-1R designation. The gas check isn't cast into the mold; it's crimped onto the bullet base when you run it through a sizing die. Running a gas check lets you push these bullets to higher velocities without leading issues.
Are handles included with the Lee 8mm mold?
The hardwood handles come included with this double cavity mold, so you don't need to buy them separately. You will still need a melting pot, alloy, and a sizing setup to finish bullets. Lee's two-cavity molds all ship with handles, unlike their six-cavity molds which require handles to be purchased on their own.
Why are Lee molds made of aluminum?
Aluminum heats up and cools down faster than iron or steel, which speeds up your casting rhythm and helps you get good bullets sooner. The blocks are also about a third of the weight, so they're easier on your hands during long sessions, and they resist rust. Lee CNC machines the cavities for consistent roundness and sizing.



Reviews
There are no reviews yet.