Description
If you shoot 40 S&W or 10mm Auto and want to take control of your bullet supply, the Lee Precision 90690 is a workhorse that keeps your casting bench humming. Each pour drops six .401 diameter, 175-grain truncated cone bullets, which is a big jump in output over a single or double cavity block. The truncated cone profile feeds smoothly through most semi-auto pistols and gives you a clean meplat for defined holes on paper.
What Sets the 90690 Mold Apart
The blocks are machined from commercial-quality aluminum and fitted with steel bushings and alignment pins, so they hold their alignment cast after cast. Aluminum is the real advantage here. It comes up to casting temperature quickly and sheds heat fast between pours, which cuts down on fatigue during long sessions and helps your bullets fill out right once the block is dialed in. On top of that, aluminum won't rust, so storage is a lot more forgiving than with iron or steel blocks.
Casting With the Lee .401 175gr TC Block
The sprue plate is hard anodized and designed to shrug off solder smears, and the cam-action assist makes cutting all six sprues in one motion feel natural. Weights are based on Lee's suggested alloy, so your actual bullet weight may run slightly different depending on the mix you pour. Most folks find these blocks need little to no break-in, and plenty report usable bullets right from the first few casts.
Handles Are a Separate Purchase
Worth knowing before you order: Lee six-cavity mold blocks ship without handles. You'll need a set of Lee Commercial Mold Handles to run this block, and those handles also work across the rest of your Lee six-cavity lineup. If you're already casting with Lee molds, odds are you've got a set ready to clamp on.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90690
- UPC: 734307906900
- Bullet Diameter: .401 inch
- Bullet Weight: 175 Grains (with Lee's suggested alloy)
- Bullet Style: Truncated Cone
- Cavities: 6
- Compatible Cartridges: 40 S&W, 10mm Auto, and similar
- Block Material: Machined Aluminum
- Sprue Plate: Hard Anodized with Cam-Action Assist
- Hardware: Steel Bushings and Alignment Pins
- Country of Origin: United States
What’s Included
- Lee Precision 90690 six-cavity bullet mold block with sprue plate
Frequently Asked Questions
Does the Lee 90690 mold come with handles?
No. Like all Lee six-cavity mold blocks, the 90690 ships without handles. You'll need a set of Lee Commercial Mold Handles to use it, and those same handles fit the rest of the Lee six-cavity lineup, so one set can serve multiple blocks.
What cartridges will these .401 175gr truncated cone bullets work in?
The 90690 drops .401 diameter, 175-grain truncated cone bullets suited to 40 S&W, 10mm Auto, and similar cartridges. The truncated cone nose profile feeds reliably through most semi-auto pistols chambered for these rounds.
Why choose an aluminum mold over iron or steel?
Aluminum blocks heat up and cool down faster than iron or steel, which reduces fatigue during long casting runs and helps bullets fill out quickly once the mold is at temperature. Aluminum is also rust resistant and lighter in the hand. The trade-off is that aluminum calls for a bit more care to avoid dinging the block.
Will my cast bullets weigh exactly 175 grains?
Not necessarily. The 175-grain figure is based on Lee's suggested alloy, and your actual weight can vary depending on the lead mixture you pour. A softer or harder alloy will shift the finished weight a few grains in either direction.





Reviews
There are no reviews yet.