Description
This Lee Precision TL358-158-2R mold drops a .358 diameter, 158 grain round nose bullet with a 2-ogive radius profile. That 158 grain weight is the classic standby for .38 Special and .357 Magnum loads, and the round nose shape feeds smooth and shoots clean at the range. With two cavities, you're pulling a pair of bullets with every pour, which adds up fast over a casting session.
What Sets the TL358-158-2R Apart
The TL in the name stands for tumble lube. Instead of the deep lube grooves you'd see on a traditional bullet, this design uses shallow micro-grooves made to work with Lee Liquid Alox or a similar tumble-on lube. You coat a batch, let them dry, and load. It's a simple, mess-reduced approach a lot of casters swear by for high-volume plinking and practice ammo. The cartridges it covers include .38 Special, .38 S&W, .38 Colt New Police, and .357 Magnum.
Build Quality on the 158gr Round Nose Mold
Lee machines the blocks from aluminum, so they won't rust, lead won't stick, and they heat up and cool down quicker than iron or steel. That faster temperature cycle means you reach good bullets after just a few throwaway casts. The cavities are CNC machined for roundness and consistent sizing, and most bullets drop ready to load without a trip through a sizing die. A tangential cutoff on the sprue plate helps cut down the little nip left at the sprue.
Getting the Most From This Lee Mold
Aluminum runs softer than steel, so treat the blocks with a little care and give the mold a proper break-in on its first session. Clean off the factory oil with a solvent, preheat the blocks, and smoke the cavities if you like. Do that and these molds earn their keep for years. This double cavity version ships with the handles, so you're set to clamp in and start casting right out of the box.
Key Specifications
- Manufacturer: Lee Precision
- Model: TL358-158-2R
- MPN: 90388
- UPC: 734307903886
- Bullet Diameter: .358 inch
- Bullet Weight: 158 grain
- Bullet Style: Round Nose, 2-Ogive Radius, Tumble Lube
- Cavities: 2 (Double Cavity)
- Compatible Cartridges: .38 Special, .38 S&W, .38 Colt New Police, .357 Magnum
- Block Material: CNC-Machined Aluminum
- Sprue Plate: Hard Anodized
- Ballistic Coefficient: .207
- Country of Origin: United States
What’s Included
- Two aluminum mold block halves
- Hardwood handles
- Hard anodized sprue plate
Frequently Asked Questions
What bullet does the TL358-158-2R mold produce?
It casts a .358 diameter, 158 grain round nose bullet with a 2-ogive radius profile. The design is tumble lube, meaning it uses shallow micro-grooves made for Lee Liquid Alox or a similar coat-on lube instead of deep traditional grooves. It's a popular all-around bullet for range and practice loads.
What calibers can I load with these bullets?
The .358 diameter 158 grain bullets work for .38 Special, .38 S&W, .38 Colt New Police, and .357 Magnum. That 158 grain weight is the traditional go-to for both .38 Special and .357 Magnum, so it covers a lot of ground for revolver reloaders.
Does this Lee mold come with handles?
Yes. This double cavity version ships with the hardwood handles and the hard anodized sprue plate, so you have what you need to start casting. Keep in mind that Lee's six-cavity molds are the ones where handles are sold separately, but this 2-cavity model includes them.
Do I need to do anything before casting with a new mold?
A quick break-in pays off. Clean the factory oil out of the cavities with a solvent, then preheat the aluminum blocks before you pour so your first bullets fill out properly. Smoking the cavities with a match helps too, and expect a few throwaway casts before the mold settles in and drops good bullets.




Reviews
There are no reviews yet.