Description
This Lee Precision #90317 mold is the go-to tool for anyone casting their own .38 caliber bullets in bulk. It produces a .358 diameter 140 grain semi-wadcutter, a classic flat-shouldered profile that cuts clean holes in paper and feeds reliably through revolvers chambered in 38 Special, 357 Magnum, 38 S&W, and 38 Colt New Police. The semi-wadcutter nose carries a ballistic coefficient of about .142, making it a dependable all-arounder for target shooting and general practice loads.
The mold blocks are machined from aluminum, which is one of the big reasons casters reach for Lee. Aluminum heats up and cools down faster than iron or steel, so you can usually start dropping good bullets after just a few casts, and the lighter blocks mean a lot less hand fatigue during a long session at the pot. Each cavity is CNC machined for tight roundness and size control, and most bullets dropped from a Lee mold can be loaded as cast without any extra sizing.
What Sets the 90317 Six-Cavity Mold Apart
Being a six-cavity design, this mold is built for heavy-duty volume production. The blocks use steel bushings and alignment pins for lasting precision, and the cam-operated, hard-anodized sprue plate is held down with spring washers at each end to keep things smooth and cut down on the pounding you get with lesser molds. That handle on the sprue plate comes attached, so you are ready to swing it the moment your lead is up to temp.
Pairing Handles With Your 358-140-SWC Mold
One thing worth knowing up front: the handles that open and close this mold are sold separately. The six-cavity blocks take the Lee #90005 handle set, so grab a pair if you do not already have them on the bench. Once you are set up, this mold earns its keep fast for anyone burning through 38 and 357 brass on a regular basis.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90317
- UPC: 734307903176
- Mold Designation: 358-140-SWC
- Cavity Count: 6-Cavity
- Bullet Diameter: .358 inch
- Bullet Weight: 140 Grains
- Bullet Style: Semi-Wadcutter (SWC)
- Ballistic Coefficient: .142
- Compatible Cartridges: 38 Special, 357 Magnum, 38 S&W, 38 Colt New Police
- Block Material: Aluminum
- Sprue Plate: Cam-operated, hard anodized
- Country of Origin: USA
What’s Included
- Lee 6-cavity mold blocks (358-140-SWC)
- Cam-operated hard-anodized sprue plate with attached handle
Frequently Asked Questions
Do the handles come with the Lee 90317 6-cavity mold?
No, the handles that open and close the mold blocks are sold separately on the six-cavity version. This mold takes the Lee #90005 six-cavity mold handles, so plan to add a set if you do not already have them. The handle attached to the sprue plate itself does come included.
What cartridges will the 358-140-SWC bullets work for?
This mold casts a .358 diameter 140 grain semi-wadcutter suitable for 38 Special, 357 Magnum, 38 S&W, and 38 Colt New Police. The semi-wadcutter profile is a popular all-around choice for target and practice loads in revolvers chambered for these rounds.
Do I need to size bullets cast from this Lee mold?
Most bullets dropped from a Lee mold can be loaded as cast without extra sizing, thanks to the CNC-machined cavities that hold tight roundness and size control. If you prefer to size and lube, a separate Lube and Size Kit is available. This mold does not include sizing equipment.
Why choose an aluminum mold over iron or steel?
Aluminum heats up and cools down faster than iron or steel, so you can usually start dropping quality bullets after just a few casts. The blocks are also about a third the weight of iron or steel, which means a lot less hand fatigue over a long casting session. Lee's aluminum blocks are rust resistant as well.





Reviews
There are no reviews yet.