Description
If you shoot a lot of .45 and want to stop paying bullet prices, casting your own is the way to go, and the Lee Precision 452-230-TC 6-Cavity Mold is one of the most popular ways to do it. This mold drops a .452 diameter 230-grain truncated cone bullet, which is the classic hardball-style profile that feeds and shoots well in .45 ACP, .45 Auto Rim, and .45 Colt. With six cavities, you're pouring half a dozen bullets every time you fill the sprue plate, so production adds up fast once you get into a rhythm.
What the 452-230-TC 6-Cavity Mold Is Built From
The blocks are machined from commercial-quality aluminum, which does a couple of things in your favor. Aluminum heats up and cools down faster than iron or steel, so you'll start dropping good bullets after just a few casts instead of fighting cold cavities for twenty minutes. It's also about a third of the weight of a steel mold, which your forearm will appreciate during a long session at the pot. The cavities are CNC machined for tight roundness and consistent sizing, and the blocks ride on steel bushings and alignment pins so the halves line up the same way every pour.
Getting the Most Out of Your Lee 6-Cavity Mold
The hard-anodized sprue plate is cam operated and held snug with tempered spring washers at each end, which keeps your cut clean cast after cast. Keep in mind this is the standard truncated cone design, not the tumble-lube version, so you'll want to size and lubricate your finished bullets with a lube and size setup. A little maintenance goes a long way here. Degrease and smoke the cavities before your first run, and keep the sprue plate and hinge points lightly lubricated so everything stays smooth. Do that, and this mold will crank out clean, consistent .45 slugs for years.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90289
- UPC: 734307902896
- Mold Designation: 452-230-TC
- Caliber: .45 Caliber
- Bullet Diameter: .452"
- Bullet Weight: 230 Grains
- Bullet Profile: Truncated Cone
- Cavity Count: 6
- Suitable Cartridges: 45 ACP, 45 Auto Rim, 45 Colt (Long Colt)
- Block Material: Machined Aluminum
- Sprue Plate: Hard-Anodized, Cam Operated
- Gas Check: No
- Country of Origin: USA
What’s Included
- Lee 452-230-TC 6-Cavity Mold Blocks
- Hard-Anodized Sprue Plate
Frequently Asked Questions
Does the Lee 452-230-TC 6-cavity mold come with handles?
No, the mold handles are sold separately. You'll want the six-cavity Lee mold handles (part #90005) to run this block. Bullet lube and sizing equipment are also sold separately.
What cartridges will the 452-230-TC bullet work in?
This mold drops a .452 diameter 230-grain truncated cone bullet suited for 45 ACP, 45 Auto Rim, and 45 Colt (Long Colt). The truncated cone profile mimics traditional hardball, so it tends to feed well in semi-autos while still working great in revolvers.
Is this the tumble-lube version of the mold?
No, this is the standard 452-230-TC design, not the tumble-lube (TL) version. You'll want to size and lubricate the finished bullets with a lube and size kit rather than simply tumbling them in liquid lube.
How do I get good bullets out of this Lee aluminum mold?
Degrease the cavities and smoke them lightly before your first casting session. Aluminum blocks heat up quickly, so you should be dropping clean, filled-out bullets after just a handful of pours. Keep the sprue plate and hinge points lightly lubricated to keep everything operating smoothly.



Reviews
There are no reviews yet.