Description
This is Lee Precision's TL358-148-WC double-cavity mold, built to cast a .358 diameter 148-grain wadcutter that's a classic for .38 Special target loads and plenty capable in .357 Magnum too. If you shoot a lot of revolver rounds, casting your own flat-nosed wadcutters is one of the best ways to keep yourself stocked, and this mold has been a go-to for handloaders for years.
What the TL358-148-WC Mold Casts
The cavities are CNC machined from aluminum, which gives you excellent roundness and consistent sizing right out of the blocks. The "TL" in the model name stands for tumble lube, meaning the bullet is grooved to work with a liquid lube like Lee's Alox rather than a traditional lube groove. Because the mold holds tight tolerances, a lot of folks run these bullets as cast without sizing, which saves a step. The full wadcutter profile punches clean, sharp-edged holes in paper, which is exactly why this style has been a target-shooting favorite for generations.
Why Shooters Reach for This Lee Wadcutter Mold
Aluminum blocks heat up fast and hold temperature well, so you get up to casting speed quickly and keep a steady rhythm going. The double-cavity layout drops two bullets per pour, which roughly doubles your output compared to a single-cavity mold without slowing you down. Feedback from reloaders is consistent on this one: it tends to drop rounds right at .358" and right around that 148-grain mark with a suitable alloy.
Loads and Cartridges for the 148gr Wadcutter
That .358 diameter 148-grain wadcutter is well suited to .38 Special, .357 Magnum, .38 S&W, and .38 Colt New Police. It shines in soft-shooting match and plinking loads where accuracy and a clean paper cut matter most. Handles are included with this mold, so once you have your melt, lube, and a sizing setup sorted out, you've got everything you need to start turning lead into usable bullets.
Key Specifications
- Manufacturer: Lee Precision
- Model: TL358-148-WC
- Manufacturer Part Number: 90279
- UPC: 734307902797
- Bullet Diameter: .358"
- Bullet Weight: 148 Grains
- Bullet Style: Wadcutter (Tumble Lube)
- Caliber/Cartridges: .38 Special, .357 Magnum, .38 S&W, .38 Colt New Police
- Cavities: 2 (Double Cavity)
- Block Material: CNC Machined Aluminum
- Handles Included: Yes
- Country of Origin: USA
What’s Included
- Lee TL358-148-WC double-cavity bullet mold block
- Sprue plate
- Mold handles
Frequently Asked Questions
What cartridges does the TL358-148-WC wadcutter mold work with?
This mold casts a .358 diameter 148-grain wadcutter that's a strong fit for .38 Special, .357 Magnum, .38 S&W, and .38 Colt New Police. The full wadcutter profile is especially popular for .38 Special target and match loads where a clean paper cut matters.
Do I need to size the bullets from this Lee mold?
The cavities are CNC machined for tight roundness and sizing, so many reloaders run these bullets as cast without any resizing. If you want to tighten things up or match your barrel exactly, a sizing die will let you dial the diameter in, but it isn't always necessary.
Are the handles included with the 90279 mold?
Yes. This double-cavity mold ships with handles and a sprue plate, so you have the core setup to start casting. You'll still want a melting pot, lube, and your alloy of choice to complete your casting bench.
What does the "TL" in TL358-148-WC mean?
TL stands for tumble lube. The bullet is designed with micro-grooves meant for a liquid lube such as Lee Liquid Alox rather than a conventional lube groove, which makes lubing quick and simple after casting.





Reviews
There are no reviews yet.