Description
If you shoot a 50-70 Government or another big fifty-caliber cartridge, finding quality projectiles can be a headache and a hit to the wallet. This Lee 515-450-F mold fixes both problems by letting you pour your own. Each casting drops a pair of .515 diameter, 450 grain round nose bullets with an overall length right around .985 inches, which is a proven profile for the 50-70 and plays nicely with similar cases like the 50-90 Sharps and 50-110 Winchester.
What Sets the 515-450-F Mold Apart
Lee machines the blocks from aluminum rather than iron or steel, and that choice pays off at the lead pot. The blocks come up to casting temperature quickly, cool back down just as fast, and weigh about a third of what steel blocks do, so your arm holds up through a long session. Aluminum also won't rust, and lead doesn't like to stick to it. The cavities are lathe bored for consistent roundness and sizing, and plenty of casters run these bullets as-cast without any extra sizing.
Casting With the Lee Double Cavity Mold
This is a double cavity setup, so you get two bullets every pour, which adds up fast when you're feeding a hungry black powder cartridge rifle. The handles are included, which is a nice touch since a lot of molds make you buy those separately. A quick note on break-in: aluminum blocks are a little softer than steel, so give the mold a gentle break-in period and handle it with care during those first casts. Wash the cavities, run a few throwaway pours to bring everything up to heat, and the bullets will start filling out clean.
The 450 grain weight is listed with Lee's suggested alloy, so your real-world weight may shift a bit depending on the mix you cast with. For anyone loading the 50-70 or feeding an old Sharps or Trapdoor, this is a straightforward, long-lasting way to keep the bullet supply going.
Key Specifications
- Manufacturer: Lee Precision
- Model: 515-450-F
- Manufacturer Part Number: 90255
- UPC: 734307902551
- Bullet Diameter: .515 inches
- Bullet Weight: 450 grains
- Nose Profile: Round Nose
- Cavities: 2 (Double Cavity)
- Bullet Overall Length: .985 inches
- Nose to First Lube Groove: .505 inches
- Suggested Cartridges: 50-70 Government, 50-90 Sharps, 50-110 Winchester
- Block Material: Machined Aluminum
- Sprue Plate: Hard Anodized
- Country of Origin: United States
What’s Included
- 515-450-F double cavity mold blocks
- Mold handles
- Hard anodized sprue plate
Frequently Asked Questions
What cartridges does the 515-450-F mold work for?
It casts a .515 diameter, 450 grain round nose bullet suited to the 50-70 Government. The same bullet also works well in other big-bore fifties like the 50-90 Sharps and 50-110 Winchester. It's a popular choice for black powder cartridge rifle shooters feeding Trapdoors, Sharps, and similar rifles.
Does this Lee mold come with handles?
Yes. Unlike some molds that sell handles separately, the 515-450-F ships with handles already included. You will still want a lead pot, ladle or bottom-pour furnace, and your casting alloy to get started.
Do I need to size the bullets after casting?
Many casters run these bullets as-cast without sizing since Lee lathe bores the cavities for consistent roundness. That said, your rifle's throat and the alloy you use will determine whether sizing improves fit and accuracy. If your bore prefers a tighter or specific diameter, a sizing die can help dial it in.
Why does Lee use aluminum blocks instead of steel?
Aluminum heats up and cools down faster than iron or steel, so you can start producing good bullets after just a few casts. It also weighs about a third of what steel blocks weigh, which cuts down fatigue during long casting runs, and it won't rust. The tradeoff is that aluminum is softer, so the mold needs a gentle break-in and careful handling.





Reviews
There are no reviews yet.