0
0

Lee Case Length Gauge & Shell Holder, 6.8mm Remington SPC

UPC: 734307901899

$11.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload 6.8mm Remington SPC, keeping your brass trimmed to a consistent length is one of those steps that quietly makes everything else downstream work better. This Lee set is a two-piece solution built just for the 6.8 SPC case, pairing a caliber-specific length gauge with its matching shell holder so you can trim to spec without fiddling with measurements or second-guessing your results. It's a simple tool that does one job and does it cleanly.

How the 6.8 SPC Length Gauge Works

The process is about as straightforward as case prep gets. You drop your empty brass into the shell holder, screw the Lee Lock Stud into the holder, thread the length gauge into a Lee cutter, and spin until the case is trimmed to the preset length. The gauge is machined to stop the cut at the correct spot, so every piece of 6.8 SPC brass comes out within the 1.666 to 1.686 inch window and gets its mouth squared up in the same motion. No calipers to babysit, no creeping measurements.

Built From Hardened Steel for the Long Haul

Both pieces are made from hardened steel and cut to tight tolerances, which is why these gauges tend to outlast the rest of your gear. Reloaders who own a drawer full of them across different calibers will tell you the 6.8 version holds up exactly like the others. It also plays nice with the rest of the Lee case prep lineup, including the Deluxe Case Conditioning Kit, the Cutter and Lock Stud, or a Zip Trim setup.

Pairing It With Your Setup

Keep in mind the gauge and shell holder work together with a few other Lee pieces to actually make the cut. The Cutter and Lock Stud are what spin the gauge and do the trimming, so if you don't already have those on the bench you'll want to grab them alongside this set. Once you're squared away, trimming a batch of 6.8 SPC brass becomes one of the quicker parts of the whole reloading routine.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90189
  • UPC: 734307901899
  • Cartridge: 6.8mm Remington SPC
  • Trim-To Length: 1.666 to 1.686 inches
  • Material: Hardened Steel
  • Pieces: 2 (Length Gauge and Shell Holder)
  • Finish: Silver
  • Function: Case Length Gauging and Shell Holding
  • Compatible With: Lee Cutter and Lock Stud or Zip Trim
  • Country of Origin: United States

What’s Included

  • 6.8mm Remington SPC Case Length Gauge
  • 6.8mm Remington SPC Shell Holder

Frequently Asked Questions

Do I need anything else to use the 6.8 SPC case length gauge?

Yes. The gauge and shell holder set the length, but you'll need a Lee Cutter and Lock Stud to actually do the trimming. You can also run it with the Deluxe Case Conditioning Kit or a Zip Trim if that's how your bench is set up. Those pieces are sold separately.

What length does this gauge trim 6.8 Remington SPC brass to?

The gauge is machined to trim 6.8 SPC cases to between 1.666 and 1.686 inches, which keeps you inside spec. Because the cut stops at a fixed point, you get the same length every time without reaching for calipers between cases.

Does the length gauge square the case mouth too?

It does. As the cutter spins against the gauge, it trims the case to length and faces the mouth square in the same motion. A square, consistent mouth helps with clean bullet seating and more uniform handloads.

Is this the same as the 6.8 Rem Special?

This gauge is cut for the 6.8mm Remington SPC cartridge, which is the correct chambering some retailers list under the 6.8 Rem Special name. The manufacturer part number is 90189, so matching that ensures you have the right one for your brass.

Additional information

UPC

734307901899

Manufacturer

Manufacturer Part Number

90189

Shipping Weight

0.05

Reviews

There are no reviews yet.

Be the first to review “Lee Case Length Gauge & Shell Holder, 6.8mm Remington SPC”