Description
Drifting sights, tapping out pins, seating parts without leaving a mark. That's exactly the kind of work this Grace USA 16oz brass hammer was built for. The soft brass face won't chew up bluing, hardened steel, or delicate firearm components the way a steel hammer will, which is why it's a fixture on so many gunsmith benches. At a full pound of head weight, it gives you the mass to move stubborn pins and roll pins while keeping the strike controlled.
What Sets the BH-16 Apart
Grace has been building tools since 1941, and this hammer shows it. The head is machine turned from CDA 360 brass rod, then hand polished one at a time before a seasoned hickory handle gets pressed in and locked down with a brass pin. That handle measures out to roughly a 10-1/2 inch overall length with a 1-1/4 inch face diameter, so you get real leverage without it feeling clumsy in tight spaces. It's the kind of construction that holds up to daily use instead of loosening or splitting after a few months.
Where This Brass Hammer Earns Its Keep
While it was made for the firearms trade, plenty of woodworkers, machinists, and mechanics keep one around too. It's a natural for driving chisels, adjusting hand plane blades, seating dowels, or any assembly job where a steel face would do damage. Folks who use it every day tend to point out the balance and the fact that a quality brass head flakes far less than the cheap imported hammers.
Made in the USA, Built to Outlast You
Every part of this hammer is manufactured and hand assembled in the United States, from the brass rod to the hickory. It's a buy-it-once tool. Take reasonable care of it and there's a good chance it outlasts your working years and gets handed down to whoever inherits your bench.
Key Specifications
- Manufacturer: Grace USA
- Manufacturer Part Number: BH-16
- UPC: 731940333162
- Head Weight: 16 oz (1 lb)
- Head Material: CDA 360 Brass, hand polished
- Face Diameter: 1-1/4 in
- Overall Length: 10-1/2 in
- Handle Material: Seasoned Hickory
- Handle Finish: Natural Wood
- Color: Brass
- Country of Origin: Made in USA
- Quantity: 1
What’s Included
- One Grace USA BH-16 16oz brass hammer with hickory handle
Frequently Asked Questions
Will the Grace USA brass hammer mar or scratch my firearm parts?
No, that's the whole point of a brass hammer. Brass is softer than the hardened steel of most firearm components, so it delivers a solid strike without marring finishes or peening pins. It's a go-to for drifting sights and knocking out pins where a steel hammer would leave marks.
What kind of work is this 16oz brass hammer best suited for?
The 16oz head gives you enough mass for stubborn pins, roll pins, and general gunsmith assembly and disassembly. Beyond guns, it handles chisel work, seating dowels, adjusting hand plane blades, and light machinist tasks. If you need a lighter touch for tiny pins, Grace also offers 4oz and 8oz versions.
Is the BH-16 really made in the USA?
Yes, every piece of it. The brass head is turned from CDA 360 rod extruded in a US mill, hand polished, and pressed onto a US-turned hickory handle that's secured with a brass pin. Grace USA has been building tools domestically since 1941.
How is the handle attached to the head?
The seasoned hickory handle is pressed into the finished brass head and locked in place with a brass pin. That construction keeps the head from working loose the way cheaper wedge-only hammers can, which is a big reason these hold up to years of daily use.





Reviews
There are no reviews yet.