0
0

Forward Controls Design CN5F A5 Castle Nut, Black Nitride

UPC: 697566711138

$25.99

48 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The CN5F is Forward Controls Design's answer to a part most folks never think twice about until it backs off at the worst possible moment. It's an extended take on their well-known CNF castle nut, built specifically for the VLTOR A5 buffer system. That extra length matters. Running an A5 setup with a standard castle nut leaves a chunk of threaded receiver extension exposed and can keep the longest carbine stocks from collapsing all the way. The CN5F was designed to cover as much of the threaded area as possible while still letting the stock fully collapse on VLTOR's RE-A5 and FCD's own RE5F.

What Makes the CN5F Castle Nut Different

FCD started with the original technical data package spec, which is already a solid design, then fixed the two things that bug people about it. First, the staking notches. Traditional mil-spec nuts have three notches cut at 45 degrees, and they can feel shallow. The CN5F carries four notches cut at 30 degrees, making them roughly 25% longer and deeper than TDP spec. Since a castle nut only gets staked in two places, having four notches means three are always available no matter how the nut times against your end plate. That's more material to bite into and more peace of mind that it isn't walking loose.

Built for the A5 System and Made to Last

The CN5F is billet machined from 4140 PH steel and finished in black nitride, which is exactly what you want on a part that lives in a high-wear, high-torque spot. Coarse serrations run around the wrench side so you can thread it down against the end plate without shredding your fingertips on the sharp wrench notches. It's also proudly made in the USA, like the rest of the FCD lineup. One thing worth noting: because the CN5F is longer, running it on a standard buffer tube may leave a small gap since the stock won't collapse quite as far. Pair it with a genuine A5 receiver extension and it does exactly what it was built to do.

If you've put money into a quality A5 build, this is the kind of small upgrade that quietly earns its keep every single range trip.

Key Specifications

  • Manufacturer: Forward Controls Design
  • Manufacturer Part Number: CN5F
  • UPC: 697566711138
  • Model: CN5F A5 Castle Nut
  • Color / Finish: Black Nitride
  • Material: Billet 4140 PH Steel
  • Platform: AR-15 / VLTOR A5 System
  • Compatibility: VLTOR RE-A5 and FCD RE5F receiver extensions
  • Staking Notches: 4 (30-degree cut)
  • Extended Length: 0.1" longer than standard CNF
  • Country of Origin: Made in USA

What’s Included

  • Forward Controls Design CN5F A5 castle nut (black nitride)
  • Installation instruction card

Frequently Asked Questions

What buffer system is the CN5F A5 castle nut made for?

The CN5F is built specifically for the VLTOR A5 buffer system. It's 0.1 inch longer than FCD's standard CNF castle nut, which lets it cover more of the threaded receiver extension while still allowing even the longest carbine stocks to fully collapse on the RE-A5 and FCD's RE5F. If you're running a genuine A5 receiver extension, this is the nut it was designed around.

Can I use the CN5F castle nut on a standard buffer tube?

You can thread it on, but because the CN5F is longer than a mil-spec nut, the stock may not collapse all the way and you might see a small gap between the stock and the nut. It's really meant to shine on A5 length receiver extensions. For a standard carbine tube, FCD's regular CNF is the better match.

Why does the CN5F have four staking notches instead of three?

A castle nut only gets staked in two places, but the CN5F's four notches mean three are always visible and available no matter how the nut times against your end plate. Each notch is cut at 30 degrees, making it about 25% longer and deeper than a standard TDP notch. That gives you more material to stake into for a lock that won't loosen without deliberate effort.

What is the CN5F castle nut made from and where is it made?

It's billet machined from 4140 PH steel and finished in black nitride for corrosion and wear resistance. Like everything Forward Controls Design produces, it's made in the USA. The coarse serrations on the wrench side also make it easier to thread down against the end plate without chewing up your fingers.

Additional information

UPC

697566711138

Manufacturer

Manufacturer Part Number

CN5F

Color

Black

Reviews

There are no reviews yet.

Be the first to review “Forward Controls Design CN5F A5 Castle Nut, Black Nitride”