Description
The Christensen Arms FFT SA Sporter Stock is aimed squarely at the hunter or precision builder who wants to trim ounces without giving up rigidity. It's built for the Remington 700 short-action footprint, which remains one of the most widely supported and trusted actions out there, so it slots into a huge range of custom and factory builds.
What sets this one apart is the construction. Flash Forged Technology compresses and cures aerospace-grade carbon fiber under extreme heat and pressure to form a monocoque shell, which is a fancy way of saying the shell itself carries the load instead of relying on heavy internal filler. That approach lets Christensen skip the usual "overbuild everything" method and instead engineer a stock that comes in up to a full pound lighter than a traditional carbon fiber composite stock. In short-action trim it tips the scale right around 18 ounces with the recoil pad on. When you're miles from the truck chasing elk or sheep, that weight savings adds up quick.
How the FFT Sporter Stock Handles in the Field
The Sporter contour keeps things trim and pointable, with a barrel channel that tapers from 1.28 inches down toward the muzzle. This is the steel barrel channel version in gray, so it's cut for standard steel sporter-contour barrels rather than the fatter varmint profile. It ships with carbon fiber bedding pillars, a recoil pad, and sling studs already installed. The recoil lug area comes spot bedded from the factory, though plan on some light inletting and a bit of fitting to get everything sitting exactly the way you want it.
Building on the FFT SA Sporter Stock
Guys running these report builds landing in the 5.5-pound range with a light action and barrel, and the general feedback is that the stock feels solid and holds zero once fitted. Pair it with your bottom metal of choice, do a little final bedding, and you've got a genuinely lightweight rig that still shoots like it means it. It's a smart pick for a mountain rifle or any project where every ounce counts.
Key Specifications
- Manufacturer: Christensen Arms
- Manufacturer Part Number: 810-00059-00
- UPC: 696528095637
- Model: FFT Sporter Stock
- Fits: Remington 700 Short Action
- Action: Bolt Action
- Contour: Sporter
- Barrel Channel: Steel, 1.28" taper
- Color: Gray
- Material: Aerospace-grade carbon fiber composite
- Construction: Flash Forged Technology monocoque shell
- Weight: Approximately 18 oz (short action)
- Length of Pull: 13.5 inches
- Pillars: Carbon fiber bedding pillars
- Hand Orientation: Right Hand
What’s Included
- FFT SA Sporter Stock
- Carbon fiber bedding pillars (installed)
- Recoil pad (installed)
- Front and rear sling studs (installed)
- Factory spot bedding at recoil lug
Frequently Asked Questions
Will the FFT SA Sporter Stock fit any Remington 700 short action?
Yes, it's cut for the Remington 700 short-action footprint, which is one of the most widely copied actions in the industry. Plenty of custom actions built on that same footprint will also drop in. Expect to do a little light inletting and final fitting to get everything seated perfectly.
Do I need special bottom metal or can I run my factory Remington bottom metal?
The stock is inlet for the Remington 700 pattern, so factory or aftermarket bottom metal designed for that footprint will generally work. Some builders run Christensen's own bottom metal, while others reuse their existing setup. It comes down to your specific components, so dry fit before final assembly.
How much lighter is the FFT Sporter Stock compared to a standard carbon fiber stock?
Flash Forged Technology can shave up to a full pound versus a traditionally manufactured carbon fiber composite stock. In short-action trim this one runs right around 18 ounces with the recoil pad attached. That difference is a big deal on a backcountry or mountain rifle where you're carrying it all day.
Does this stock come bedded, or do I need to bed it myself?
The recoil lug area is spot bedded from the factory to get you most of the way there. Christensen still recommends some spot bedding of the recoil lug and slight inletting for the best fit and consistency. Budget a little bench time to dial in the fit before you call the build done.





Reviews
There are no reviews yet.