0
0

Forward Controls Design EPC Single Dimple Ejection Port Cover, Black

UPC: 683828757525

$51.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forward Controls Design EPC is one of those small upgrades that AR builders geek out over for good reason. It swaps out the stamped mil-spec ejection port cover for a billet 7075 aluminum piece that's machined to TDP dimensions and finished with hard coat Type III anodizing, so it holds up to the same abuse as the rest of your rifle. If you're chasing that clean, cohesive look on a build, this is the kind of detail that pulls it all together.

What Sets the EPC Single Dimple Apart

What makes the EPC different from a plain port door comes down to a couple of smart design choices. There are two small tabs flanking the cutout for the port cover spring, and they let the cover rest at a greater angle when it's open. That extra bit of space between the cover and the lower receiver means you can actually get a fingertip underneath it to swing it shut without fumbling. It's the sort of thing you don't notice until you've used it, and then going back to a flat stamped cover feels clumsy.

The Single Dimple, Explained

The single dimple is a shallow circular depression on the side of the cover, and it's there for a real reason. A flat surface gives your finger nothing to reference, but the dimple offers tactile feedback and a little traction when you're closing the port cover, especially with gloves on or when your eyes are elsewhere. Forward Controls treats the outside of the EPC as a control surface, so every texture and flat is intentional.

Fit and Finish on the EPC

This cover is compatible with TDP spec upper receivers and weighs in at a featherweight 0.30 ounces. Keep in mind it may feel a touch stiff on the first few open and close cycles, which is completely normal and loosens up after a couple passes. Every EPC carries the subtle laser engraved Cygnus mark so you know it's the genuine FCD article, and like the rest of their catalog, it's proudly designed and made in the USA.

Key Specifications

  • Manufacturer: Forward Controls Design
  • Manufacturer Part Number: EPC 1D BLK
  • UPC: 683828757525
  • Model: EPC Single Dimple
  • Color: Black
  • Finish: Hard Coat Type III Anodized
  • Material: Billet 7075 Aluminum
  • Platform: AR-15
  • Compatibility: TDP Spec Upper Receivers
  • Weight: 0.30 oz
  • Texture: Single Dimple
  • Country of Origin: USA

What’s Included

  • Forward Controls Design EPC Single Dimple ejection port cover
  • Port cover hinge pin
  • Port cover spring

Frequently Asked Questions

Will the EPC single dimple fit my AR-15 upper?

The EPC is designed to be compatible with TDP spec upper receivers, which covers most standard AR-15 uppers. A few proprietary uppers like BCM's Mk2, Aero M4E1, and Centurion Arms CM4 are not compatible with the tabbed version. It's worth checking your upper's ejection port latch relief cut, since a shallow cut may need a light touch-up for the cover to close fully.

Does the ejection port cover come with a spring and pin?

Yes. Each EPC ships with the port cover hinge pin and spring, so you have the hardware needed to install it. You'll just need basic tools to swap it onto your upper.

What's the point of the single dimple?

The dimple is a shallow circular depression on the side of the cover that gives your finger tactile feedback and grip when you close the port. A flat surface gives you nothing to reference, while the dimple helps you locate and operate the cover by feel. It's especially handy in gloves or when you're not looking down at the rifle.

Why does the EPC feel stiff when I first install it?

Some initial stiffness when opening and closing is completely normal for a fresh EPC. It typically loosens up after two or three open and close cycles as everything seats in. Give it a few passes and it'll swing smoothly.

Additional information

UPC

683828757525

Manufacturer

Manufacturer Part Number

EPC 1D BLK

Reviews

There are no reviews yet.

Be the first to review “Forward Controls Design EPC Single Dimple Ejection Port Cover, Black”