0
0

Forward Controls Design EMR-H Enhanced Magazine Release Button – Dimpled, Mil-Spec

UPC: 682157948727

$18.99

15 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forward Controls Design has a knack for taking a part everyone overlooks and quietly making it better, and the EMR-H is a great example. Instead of bolting on a giant slab of aluminum, FCD kept the same footprint as a factory button and just refined the parts that matter. The face is gently curved to follow the natural bend of your fingertip, and the all-angle dimpled texture keeps your finger centered and locked in so you get a clean, positive press every time. It only stands about 0.02 inches taller than a standard button, so it tucks in nice and low with minimal protrusion above the mag release fence on most forged receivers.

Why the EMR-H Dimpled Button Works So Well

The whole idea here is more usable surface without the downsides of a big oversized release. Those chunky aftermarket buttons stick way out past the fence, and since it only takes a tiny amount of travel to drop a mag, that extra height can bite you at the worst time. The EMR-H gives your finger a bigger, grippier target while staying inside that protective fence, which is exactly why it earned a following on duty and defensive builds. The dimpled texture bites even with gloves on or when your grip is less than ideal.

Built From 4140 Steel and QPQ Coated

Back in late 2019, FCD swapped the original 7075 aluminum EMR for this heavy version machined from 4140 chrome moly bar stock, hence the H. It wears a tough QPQ (salt bath nitride) finish that shrugs off wear and corrosion and matches the flat black look of most rifles. This version uses a mil-spec through hole for the magazine catch shaft, so it drops onto any standard AR-15 or M16 pattern lower and works with your existing catch and spring.

Installing the EMR-H

Swapping it in is a quick job with basic tools and takes just a few minutes on the bench. It threads onto your existing magazine catch, and reviewers consistently note how cleanly FCD parts line up when torqued down. It's the kind of small upgrade you notice every time you run a mag change.

Key Specifications

  • Manufacturer: Forward Controls Design
  • Manufacturer Part Number: EMR-H, AA (Dimpled)
  • UPC: 682157948727
  • Platform: AR-15 / M16 pattern lowers
  • Texture: All-angle dimpled face
  • Face Profile: Slightly curved, self-centering
  • Hole Type: Mil-spec through hole for standard magazine catch
  • Height Over Factory Button: Approximately 0.02 inches taller
  • Material: 4140 chrome moly steel
  • Finish: QPQ (salt bath nitride)
  • Country of Origin: Made in USA

What’s Included

  • Forward Controls Design EMR-H enhanced magazine release button (dimpled)

Frequently Asked Questions

Will the EMR-H fit my standard AR-15 lower?

Yes. This dimpled EMR-H uses a mil-spec through hole for the magazine catch shaft, so it drops onto any standard AR-15 or M16 pattern lower. It works with your existing magazine catch and spring, no special parts needed.

How is the EMR-H different from those big oversized mag release buttons?

The EMR-H keeps the same footprint as a factory button and only stands about 0.02 inches taller, so it stays low behind the mag release fence. Oversized buttons stick out well past that fence, which can lead to bumping a mag loose since it takes very little travel to release. You still get a larger, grippier surface with the curved dimpled face, just without the extra bulk hanging out there.

What is the EMR-H made of and how durable is the finish?

It's machined from 4140 chrome moly steel bar stock, which is why FCD calls this the heavy or H version after retiring the older aluminum model. The QPQ salt bath nitride finish is tough, resists wear and corrosion, and gives it a clean flat black look that blends with most rifles.

Is the EMR-H hard to install?

Not at all. It threads onto your existing magazine catch and takes just a few minutes with basic tools. Users regularly point out how nicely FCD parts line up when torqued down, so you shouldn't have any fitment headaches.

Additional information

UPC

682157948727

Manufacturer

Manufacturer Part Number

EMR-H, AA (DIMPLED)

Reviews

There are no reviews yet.

Be the first to review “Forward Controls Design EMR-H Enhanced Magazine Release Button – Dimpled, Mil-Spec”