Description
The MDT XRS is what happens when a traditional-style rifle stock and a modern chassis meet in the middle. Built for the right-hand CZ 457 short action, it gives you the rigidity and repeatability of an aluminum chassis while keeping the comfortable shouldering and hand feel you already know. At the heart of it sits a full-length CNC-machined 6061 aluminum core, wrapped in high-strength textured polymer side panels that keep your hands off cold or hot metal when the weather turns. A precision aluminum V-block bedding system locks the action in place for consistent torque and a free-floated barrel, which is where a lot of your accuracy gains come from.
Dialing In the XRS to Fit You
Fit is a big part of shooting well, and the XRS gives you plenty of room to get it right. Length of pull adjusts from 13.25 inches out past 15 inches using the included spacers, and the quick-adjust cheek piece lets you set comb height so your eye lines up naturally behind the scope. It also ships with two interchangeable grip modules, one angled and one vertical, so you can swap to whichever hand position feels best with a couple of screws.
Mounting Room on the CZ 457 XRS Forend
The generous 12-inch forend runs M-LOK slots at the 3, 6, and 9 o'clock positions, giving you a clean way to add a bipod, ARCA rail, Picatinny section, or a barricade stop. There's a sling swivel stud front and rear too. The barrel channel is roomy enough to clear everything from a slim sporter to a heavier target barrel, so it works whether you're plinking, hunting small game, or training on a rimfire trainer.
What Sets the XRS Apart
One detail worth calling out for the CZ 457 model: it feeds from factory CZ 457 rimfire magazines rather than AICS pattern mags used on the centerfire versions. The whole thing tips the scales around 3.9 pounds depending on inlet, and the bottom metal is built right into the chassis, so there's no extra hardware to chase down before your first range trip.
Key Specifications
- Manufacturer: MDT
- Manufacturer Part Number: 105051-FDE
- UPC: 682157402229
- Model: XRS Chassis System
- Action Fit: CZ 457 Short Action, Right Hand
- Color / Finish: Flat Dark Earth, Matte
- Style: Chassis
- Core Material: Full-length CNC-machined 6061 aluminum with textured polymer panels
- Bedding: Precision aluminum V-block
- Length of Pull: Adjustable 13.25" to 15+" via spacers
- Cheek Piece: Quick-adjust, tool-less
- Forend: 12" with M-LOK slots at 3, 6, and 9 o'clock
- Magazine Compatibility: Factory CZ 457 rimfire magazines
- Max Barrel Diameter: 1.250"
- Weight: Approx. 3.9 lbs (depending on inlet)
What’s Included
- MDT XRS chassis for CZ 457 (right hand, FDE)
- Angled grip module
- Vertical grip module
- Length of pull spacers
- Action screws
- Instruction manual
Frequently Asked Questions
What magazines does the MDT XRS for the CZ 457 use?
This CZ 457 inlet feeds from standard factory CZ 457 rimfire magazines, so your existing .22 LR or .17 HMR mags will drop right in. This is different from the centerfire XRS versions, which run AICS pattern magazines. The bottom metal is built into the chassis, so you won't need any extra parts to get feeding.
Will the XRS chassis fit a left-hand CZ 457?
No, this particular model is cut for right-hand CZ 457 short actions only. MDT does offer left-handed versions of the XRS for some actions, so if you shoot a lefty rifle you'll want to look for the LH-specific inlet instead.
Is the barrel free-floated in the MDT XRS?
Yes. Once your action is torqued into the V-block bedding system, the barrel free-floats down the length of the 12-inch forend with no contact against the chassis. That's a big part of why chassis setups like the XRS tend to tighten up groups compared to a stock that touches the barrel.
Can I add a bipod or ARCA rail to the XRS forend?
Absolutely. The 12-inch forend has M-LOK slots at the 3, 6, and 9 o'clock positions, which lets you bolt on a bipod, an ARCA rail, a Picatinny section, or a barricade stop. Many folks running ARCA accessories add a full-length ARCA rail to the bottom for tripod and barricade work.





Reviews
There are no reviews yet.