Description
When you're checkering a stock, fitting small parts, or chasing a stubborn scratch on a bolt face, having the right magnification makes the difference between eyestrain and getting the job done. The OptiVISOR No. 10 lens plate carries the LP-10 designation and delivers 3.5x magnification at roughly a 4-inch focal length, putting it toward the stronger end of the OptiVISOR lineup. Keep in mind the model number is not the magnification, so No. 10 does not mean 10x. It's the 10-diopter plate that gives you that close-in 3.5x power.
What the No. 10 Lens Plate Brings to the Bench
These are real optical glass prismatic lenses, ground and polished to precision standards with beveled edges and set into the interchangeable plastic frame. That glass construction resists scratching better than acrylic and holds clarity across the whole field, which matters when you're staring through it for a long session. The 4-inch working distance keeps your hands and tools close to the work without your face crowding the part.
Swapping the LP-10 Into Your OptiVISOR
One of the best things about the OptiVISOR system is that every lens plate fits every DA-series headband. This LP-10 is the same plate that ships standard on the DA-10 visor, so you can pop it in whenever you need extra reach for detailed work and swap back to a lower-power plate for general tasks. The plates attach and release with simple screws or pins. The first removal can feel snug, which is normal on a fresh plate.
Why Gunsmiths Reach for This Magnification
Made in the USA by Donegan Optical, the OptiVISOR platform has been a favorite among jewelers, watchmakers, and gunsmiths for good reason. It leaves both hands free, allows three-dimensional vision, and can be worn right over prescription or safety glasses. The 3.5x plate is a strong pick for engraving, sight work, spring and detent installation, and any job where you need to see the small stuff clearly.
Key Specifications
- Manufacturer: Donegan Optical (OptiVISOR)
- Manufacturer Part Number: LP 10
- Model: No. 10 / LP-10
- UPC: 633096000571
- Magnification: 3.5x
- Diopter: 10 Diopter
- Focal / Working Distance: Approx. 4 inches
- Lens Material: Optical glass prismatic lenses
- Frame: Interchangeable plastic lens plate
- Compatibility: Fits all OptiVISOR DA-series headbands
- Country of Origin: Made in USA
What’s Included
- One OptiVISOR No. 10 (LP-10) replacement lens plate
Frequently Asked Questions
Does the OptiVISOR No. 10 lens plate really mean 10x magnification?
No, the number is not the magnification. The No. 10 plate is the 10-diopter version, which works out to 3.5x magnification at about a 4-inch working distance. It's one of the stronger plates in the OptiVISOR lineup, but it's not 10x.
Will the LP-10 lens plate fit my existing OptiVISOR headband?
Yes. All OptiVISOR lens plates are interchangeable across the DA-series headbands, so any plate will fit any of those visors. This is the same plate that comes standard on the DA-10 model, so you can add it or swap it in as your work demands.
Is this a glass lens or plastic?
The lenses themselves are optical glass prismatic lenses, ground and polished to precision standards with beveled edges. They're mounted in an interchangeable plastic frame. The glass holds up well to scratching and keeps detail sharp across the field.
Can I use the OptiVISOR No. 10 plate while wearing my glasses?
Yes. The OptiVISOR is designed to be worn over prescription or safety eyewear, and this lens plate does not change that. That makes the 3.5x plate handy for detailed gunsmithing tasks like sight work, engraving, and small parts fitting.




Reviews
There are no reviews yet.