0
0

OptiVISOR No. 5 Lens Plate 2.5X Magnification (LP-5) Replacement

UPC: 633096000557

$34.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The OptiVISOR No. 5 lens plate drops right into your existing OptiVISOR headband and delivers 2.5X magnification at roughly an 8-inch focal length. That working distance hits a sweet spot for a lot of bench work, giving you real magnification on tiny parts while still leaving enough room to run a screwdriver, file, or punch underneath. If you already own an OptiVISOR, this is the easy way to add a new power without buying a whole new setup.

Where the No. 5 Lens Plate Earns Its Keep

The lenses here are precision optical glass, ground and polished to ophthalmic standards with beveled edges. That matters when you're staring through them for an hour straightening a bent sight or inspecting the edges on a sear engagement. Gunsmiths reach for the OptiVISOR because it keeps both hands free and gives you true three-dimensional vision, which you don't get from a single loupe. It's the same reason jewelers, watchmakers, and engravers have leaned on these for decades.

Picking the Right OptiVISOR Lens Plate Power

Magnification and working distance go hand in hand. As the power climbs, your focal distance shrinks, so the No. 5 at 2.5X and 8 inches is a popular middle ground for detailed gun work where you still want a little breathing room over the part. If you find yourself wanting to see finer detail down the road, you can grab a higher-power plate and swap it in seconds. That's the whole appeal of the plate system.

Swapping plates is quick and tool-free thanks to the interchangeable frame that pins into the visor body. The No. 5 is made in the USA by Donegan Optical, the folks who've built these magnifiers since the early 1950s, and the glass construction holds up to real shop use. Keep a couple of powers on the bench and you've got the right view for just about any close job that comes across it.

Key Specifications

  • Manufacturer: Donegan Optical (OptiVISOR)
  • Manufacturer Part Number: LP-5
  • Lens Number: No. 5
  • Magnification: 2.5X
  • Focal / Working Distance: 8 inches
  • Diopter: 5 Diopter
  • Lens Material: Precision optical glass (crown ophthalmic), prismatic
  • Lens Finish: Ground and polished, beveled edges
  • Frame: Interchangeable plastic frame
  • Compatibility: OptiVISOR DA headband magnifiers
  • Country of Origin: Made in USA
  • UPC: 633096000557

What’s Included

  • One OptiVISOR No. 5 (LP-5) 2.5X replacement lens plate
  • Protective carrying case

Frequently Asked Questions

Will the No. 5 lens plate fit my OptiVISOR?

Yes, the LP-5 is a standard replacement plate designed for the OptiVISOR DA headband magnifiers. It pins into the visor body using the interchangeable frame, so if you already run an OptiVISOR you can drop this one right in. No tools needed for the swap.

What magnification and working distance does the No. 5 give me?

The No. 5 plate provides 2.5X magnification at roughly an 8-inch focal length. That means you'll want to keep your work about 8 inches from your eyes for the sharpest view. It's a solid middle-of-the-road power for detailed gun work where you still want some room to move tools under the lens.

Is this glass or plastic lens?

The No. 5 uses precision optical glass, ground and polished to ophthalmic standards with beveled edges, mounted in a plastic frame. Glass gives you clean, distortion-free clarity that holds up well over long sessions at the bench. Donegan makes these in the USA.

Can I use the OptiVISOR over my regular glasses?

The OptiVISOR system is designed to be worn over prescription or safety glasses, so you don't have to take yours off to use it. The lens plate itself doesn't change that, it just sets the magnification power. Keep in mind this listing is the lens plate only and not the full headband.

Additional information

UPC

633096000557

Manufacturer

Manufacturer Part Number

LP 5

Reviews

There are no reviews yet.

Be the first to review “OptiVISOR No. 5 Lens Plate 2.5X Magnification (LP-5) Replacement”

Related Products