0
0

OptiVISOR No. 10 DA-10 Headband Magnifier, 3.5X Optical Glass

UPC: 633096000465

$59.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

When you're squinting at tiny sear surfaces, engraving lines, or the deep-stamped serial numbers on an old receiver, a good magnifier stops being a luxury and becomes part of the bench. The OptiVISOR No. 10 (model DA-10) delivers 3.5X magnification through real optical glass, ground and polished into prismatic binocular lenses so you get true three-dimensional depth instead of the flat, warped view you'll find on cheap plastic knockoffs. The DA-10 is the stronger end of the OptiVISOR family, focusing at right around a 4-inch working distance, which puts it squarely in the zone for the closest, finest detail work.

What the OptiVISOR No. 10 Does at the Bench

This is a hands-free, head-worn setup, so both hands stay free for stoning, filing, soldering, or running a checkering tool. The whole visor tilts up out of your line of sight when you want normal vision, then flips right back down when you need the glass. Gunsmiths reach for it constantly, and it's just as at home with jewelers, watchmakers, machinists, and anyone doing precision work with small parts. It also sits happily over prescription or safety glasses, so you don't have to choose between seeing clearly and staying protected.

Comfort That Holds Up on the OptiVISOR DA-10

Detail work means long sessions, and this visor is built for them. It weighs only about 4 ounces, and the dial-adjustable continuous headband dials in to fit just about any head size and locks in place without fuss. A genuine leather comfort band pads the forehead, and the high-impact visor shrugs off shop abuse. Made in the USA by Donegan Optical, the OptiVISOR has been the go-to headband magnifier for decades for a reason.

One thing worth knowing going in: higher magnification means a shorter focal length, so with the No. 10 you'll be working closer to the piece than you would with a lower-power lens. If most of your work is up close and fine, the 3.5X is the sweet spot. The lens plates are interchangeable too, so you can swap in a different power down the road without buying a whole new headband.

Key Specifications

  • Manufacturer: Donegan Optical (OptiVISOR)
  • Manufacturer Part Number: DA-10
  • Model: No. 10 / DA-10
  • UPC: 633096000465
  • Magnification: 3.5X
  • Focal Length / Working Distance: 4 inches
  • Lens Type: Ground and polished prismatic optical glass
  • Lens Plates: Interchangeable
  • Headband: Dial-adjustable, genuine leather comfort band
  • Visor: High-impact, tilts/flips up
  • Weight: Approx. 4 oz
  • Wear Over Glasses: Yes, fits over prescription or safety eyewear
  • Country of Origin: Made in USA

What’s Included

  • OptiVISOR No. 10 (DA-10) headband magnifier
  • 3.5X optical glass lens plate installed

Frequently Asked Questions

What magnification and working distance does the OptiVISOR No. 10 give you?

The No. 10 (DA-10) provides 3.5X magnification with a focal length of about 4 inches. That's the higher-power end of the OptiVISOR lineup, so it's built for the finest close-up work. Just keep in mind you'll be working close to the piece, since stronger magnification always shortens the focal distance.

Can I wear the OptiVISOR DA-10 over my regular glasses?

Yes. The OptiVISOR is designed to be worn over prescription eyeglasses or safety glasses without a problem. The dial-adjustable headband opens up wide enough to fit comfortably over frames and dials down to lock in a secure fit.

Is this OptiVISOR a good pick for gunsmithing work?

It's a longtime favorite among gunsmiths for exactly this kind of thing. People use it for engraving, checkering, stock work, sear and trigger detailing, and reading faint or deeply stamped markings. The hands-free design and true binocular glass optics make close bench work a lot easier on your eyes.

Are the lenses real glass, and can they be swapped out?

The lenses are genuine optical glass, ground and polished to prismatic standards for clarity and true three-dimensional depth. The lens plates are interchangeable, so if your work changes you can switch to a different magnification power later without replacing the whole headband.

Additional information

UPC

633096000465

Manufacturer

Manufacturer Part Number

DA-10

Reviews

There are no reviews yet.

Be the first to review “OptiVISOR No. 10 DA-10 Headband Magnifier, 3.5X Optical Glass”