Description
The Norton MT-134 is a diamond-profile India stone measuring 4 inches long, made from man-made aluminum oxide in a medium grit. That pointed diamond cross-section is the whole reason gunsmiths keep one of these on the bench. It gets you into the nooks, corners, and angled surfaces that a flat bench stone simply can't touch, which is exactly what you need when you're stoning trigger and sear engagement surfaces or cleaning up an edge on a cutter.
What the MT-134 Diamond Stone Does Best
Aluminum oxide India stones like this one are prized for cutting faster than a hard Arkansas while still leaving a smooth, uniform finish. The medium grit lands right in the sweet spot for most work: it's aggressive enough to knock down factory burrs and reshape an edge, but controlled enough that you're not tearing up the surface. Folks who work on firearms reach for this shape to smooth out trigger pulls, chase away manufacturing roughness on new parts, and hone cutting tools to close tolerances. It's a favorite for lapping, honing, deburring, and polishing where the geometry has to reach into places a wider stone won't fit.
Getting the Most From Your MT-134 India Stone
Run a few drops of honing or stoning oil on the surface before every session. The oil floats away the metal particles and abrasive dust so the pores don't clog, which keeps the stone cutting clean and consistent. One of the things people appreciate about these India stones is how well they hold their shape. There's no dishing, no shedding grit, and no soaking required before use. Treat it right and it'll stay flat and sharp through years of steady work.
The diamond cross-section makes this a natural pairing with flat stones and finer grits if you want to step up your finish. Plenty of people start their metal removal here, then move to a finer stone or polishing compound to bring an edge home. For anyone doing detailed tool or trigger work, the MT-134 earns its spot in the kit.
Key Specifications
- Manufacturer: Norton
- Model: MT-134
- UPC: 614636867151
- Style: India
- Abrasive Material: Aluminum Oxide
- Cross Section Shape: Diamond
- Grit: Medium
- Length: 4 inches
- Nominal Size: 4 x 3/8"
- Color: Orange-brown
- Primary Use: Lapping, honing, sharpening, deburring, polishing
What’s Included
- Norton MT-134 diamond-shaped India stone (single stone)
Frequently Asked Questions
What is the Norton MT-134 diamond stone used for?
It's a diamond-shaped India stone designed for reaching into tight corners and angled surfaces that flat stones can't get to. Gunsmiths commonly use it for stoning trigger and sear engagement surfaces, deburring, and honing cutting tools. The medium grit works well for knocking down factory roughness and shaping edges to close tolerances.
What grit is the MT-134 India stone?
The MT-134 is a medium grit stone, which on Norton's India line generally runs around 240 grit. Medium is the go-to for producing an average, working edge on a broad range of tools and for general cleanup work. If you want a finer polish afterward, you can follow up with a fine stone or polishing compound.
Do I need to use oil with the Norton MT-134?
Yes, a light coat of honing or stoning oil before each use is the way to go. The oil floats metal and abrasive particles off the surface so the pores don't clog, which keeps the stone cutting cleanly. It also helps produce a smoother, more consistent result on your work.
Does the MT-134 stone hold its shape over time?
It does. Aluminum oxide India stones are known for staying flat and not shedding grit or dishing out with regular use. That makes the diamond profile especially valuable, since it keeps those crisp points and edges you rely on for detailed work over a long service life.





Reviews
There are no reviews yet.