Description
Aging eyes and a plain brass bead are a rough combination on the trap field or in the duck blind. The Hi-Viz Spark II fixes that with a bright red fiber optic dot that gathers ambient light and gives you a clean, glowing aiming point without washing out the target behind it. It replaces the standard front bead on most shotguns, so you get a big upgrade in visibility from a part that tucks away small and stays out of your way.
What Makes the Spark II Worth the Swap
The base is machined steel, not plastic, so it holds up to recoil and the usual knocks that come with hauling a gun around. The fiber optic LitePipe pulls in light from above and channels it into that red dot, which means faster target acquisition and a more instinctive point when a bird flushes or a clay breaks the trap house. It stays bright in the field but does not glare so hard that it blocks what you are trying to hit.
Fitting the Spark II to Your Shotgun
Installation is straightforward on any shotgun with a threaded, removable front bead, plain barrel or vent rib. Each Spark II comes packaged with five threaded studs in common sizes (6-48, 3-56, 5-40, 3mm x .5, and 3mm x .6), covering the vast majority of shotguns from Beretta and Benelli to Browning, Remington, Mossberg, Winchester, and beyond. Thread in the stud that matches your barrel, add a drop of thread locker, and snug it down with a small wrench. A quick check against Hi-Viz's shotgun application chart takes the guesswork out before you buy.
A Note on the Red LitePipe
Unlike the newer Spark III, the LitePipes on the Spark II are not interchangeable, so the red dot is what you get here. Red tends to pop nicely against green fields and clay targets, which is why it stays a favorite among wingshooters and clay busters alike. It is a small, affordable piece of kit that punches well above its size when it comes to how much easier your gun is to shoot.
Key Specifications
- Manufacturer: Hi-Viz
- Model: Spark II
- Manufacturer Part Number: BD1008
- UPC: 613485585308
- Product Type: Fiber Optic Bead Replacement Front Sight
- Fiber Optic Color: Red
- Base Material: Steel
- Fit: Shotguns with removable front bead, plain barrel or vent rib
- Included Thread Sizes: 6-48, 3-56, 5-40, 3mm x .5, 3mm x .6
- LitePipe: Non-interchangeable (red)
- Warranty: Limited Lifetime Warranty
What’s Included
- Spark II red fiber optic front sight
- 5 threaded installation studs (6-48, 3-56, 5-40, 3mm x .5, 3mm x .6)
Frequently Asked Questions
Will the Spark II fit my shotgun?
The Spark II works on most shotguns that have a threaded, removable front bead, whether you have a plain barrel or a vent rib. It ships with five different thread sizes to cover the vast majority of common makes and models. If you want to be certain before installing, Hi-Viz publishes a shotgun application chart you can cross-check against your gun.
How do I install the Spark II front sight?
Unscrew or remove your existing front bead, then pick the included threaded stud that matches your barrel's threads. Thread the Spark II into place and snug it down with a small wrench. A drop of thread locker is a smart move to keep it from backing out under recoil.
Can I change the color of the fiber optic on the Spark II?
No, the LitePipe on the Spark II is not interchangeable, so this model comes set up with a red dot. If you want to swap between colors like red, green, and white, that is a feature of the Spark III instead. Red is a popular pick because it stands out well against green fields and clay targets.
Is the red dot bright enough for hunting and clays?
Yes, the fiber optic LitePipe pulls in surrounding light and glows a bright red without being so harsh that it hides your target. That translates to quicker, more instinctive target acquisition on flushing birds or breaking clays. The steel base also holds up to the recoil and handling that comes with regular field use.





Reviews
There are no reviews yet.