Description
The Redding 25 Creedmoor Seating Die (part number 92960) is the straightforward, no-nonsense seater you want when you're building quality loads for the new quarter-bore. It handles the final and arguably most important step of the reloading process: pushing the bullet down into the case to a consistent depth. Redding builds these from high-quality alloy and hand polishes every one, so the fit and finish you get is a cut above what the price tag suggests.
What the Redding 92960 Seater Die Brings to the Bench
This is Redding's standard seating die, which means it comes with a bullet guide, a built-in crimping ring, and the correct .257-caliber seating plug for the 25 Creedmoor. The bullet guide helps start your projectile straight before it ever contacts the stem, which goes a long way toward keeping runout low and your groups tight. The built-in crimping ring gives you the option to apply a light roll crimp if your load calls for it, though a lot of precision handloaders prefer to seat and crimp as separate steps. The 7/8"-14 threads fit just about any common single-stage or progressive press, so it drops right into whatever setup you're already running.
Loading the 25 Creedmoor with the Redding Seating Die
The 25 Creedmoor is a 6.5 Creedmoor case necked down to .257, built around a fast 1:7.5 twist so it can stabilize heavy, high-BC quarter-bore bullets. It splits the difference between the 6mm and 6.5 Creedmoor, giving you flat trajectory, good wind-bucking, and manageable recoil in a short-action package. That makes careful bullet seating worth the effort, and this die lets you dial in a consistent seating depth round after round.
Room to Grow with Your Redding 25 Creedmoor Seater
If you decide you want micrometer-level repeatability down the road, this die accepts a Redding Bullet Seating Micrometer replacement plug (available in standard and VLD profiles for seating long, pointy match bullets). That makes it an easy entry point that can grow right along with your reloading habits.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 92960
- UPC: 611760929601
- Caliber: 25 Creedmoor
- Die Type: Standard Seating Die
- Bullet Diameter: .257"
- Thread Size: 7/8"-14
- Material: High-quality alloy, hand polished
- Crimp: Built-in crimping ring (roll crimp capable)
- Shellholder: Standard #1 (sold separately)
- Country of Origin: USA (Cortland, New York)
- Gun Type: Rifle
What’s Included
- Redding 25 Creedmoor standard seating die
- Bullet guide
- Built-in crimping ring
- Standard .257-caliber seating plug
Frequently Asked Questions
Does the Redding 25 Creedmoor seater die come with a micrometer?
No, this is Redding's standard seating die (92960), which uses a standard seating plug rather than a micrometer top. It still gives you precise, repeatable seating depth once it's set. If you want micrometer adjustment later, you can swap in a Redding Bullet Seating Micrometer plug, available in standard and VLD profiles.
Can this die apply a crimp?
Yes, the standard seating die includes a built-in crimping ring that can apply a light roll crimp as you seat. Many precision handloaders prefer to seat and crimp in separate steps for the best consistency, but the option is there if your load calls for a crimp.
Will the Redding 92960 fit my press?
It has standard 7/8"-14 threads, which fit nearly all common single-stage and progressive reloading presses. If your press takes standard dies, this one will thread right in.
Do I need a shellholder with this seater die?
Yes, a shellholder is not included with the die. The 25 Creedmoor uses a standard #1 shellholder (Redding part 11001), which you'll need for seating and for your sizing operations.





Reviews
There are no reviews yet.