Description
Redding has been building reloading dies in Upstate New York since the late 1940s, and the 91960 full length sizing die carries that reputation into the 25 Creedmoor. This is the workhorse die that squeezes a fired case back down to proper dimensions while knocking out the spent primer in the same pull of the handle. If you run a bolt gun, a gas gun, or anything in between, full length sizing is the setup that keeps your brass chambering reliably round after round.
The die sizes the entire case, both the body and the neck, and resets shoulder position when you've got it dialed in with a headspace comparator or gauge. A decapping rod assembly with an expander button rides inside, so as the case pulls back out, the button irons the neck to a consistent inside diameter and sets your neck tension. That one-pass simplicity is why the standard full length sizer remains the most popular die in the Redding lineup for folks who want straight, dependable ammo without a lot of fuss.
What Sets the Redding 91960 Apart
Build quality is where these dies earn their keep. The bodies are machined from quality steel on precision lathes, heat treated, then hand polished to a surface hardness in the Rc 60 to 62 range. That polished interior cuts down on sizing effort and helps extend the life of your cases. Every die uses the industry-standard 7/8-14 thread, so it drops straight into any common single stage or progressive press.
Dialing In the 25 Creedmoor Sizer
The 25 Creedmoor sits between the proven 6.5 and 6mm Creedmoor as a flat-shooting, mild-recoiling round that works well across a range of actions including modern sporting rifles. For handloaders, that means a cartridge that rewards careful case prep, and a dependable full length sizer is the foundation. Pair the 91960 with a shell holder sized for the case head and a seating die to round out your bench, and you've got the core of a 25 Creedmoor reloading setup.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 91960
- UPC: 611760919602
- Caliber: 25 Creedmoor
- Die Type: Full Length Sizing Die
- Function: Resizes full case body and neck, deprimes
- Material: Heat-treated steel
- Surface Hardness: Rc 60-62, hand polished
- Thread: 7/8-14 (industry standard)
- Decapping Assembly: Included with expander button
- Country of Origin: United States
- Quantity: 1 die
What’s Included
- Redding 25 Creedmoor full length sizing die
- Decapping rod assembly with expander button
- Plastic storage box
Frequently Asked Questions
What does the Redding 25 Creedmoor full length sizing die do?
It resizes the entire fired case, both the body and the neck, back to proper dimensions so it chambers reliably. In the same stroke it removes the spent primer using the decapping rod. The expander button inside also sets consistent neck tension as the case is pulled back out.
Does the 91960 include a shell holder?
No, the shell holder is not included and is sold separately. You'll want the correct shell holder matched to the 25 Creedmoor case head so the case seats properly in your press ram. Most 25 Creedmoor setups use the same shell holder as other cartridges sharing that case head size.
Will this die fit my reloading press?
Yes, it uses the industry-standard 7/8-14 thread found on virtually all common single stage and progressive presses. That means it threads right in with no adapters. It's a good idea to set shoulder bump with a headspace comparator or gauge when you first dial it in.
Is a full length sizer better than a neck sizer for the 25 Creedmoor?
Full length sizing works the whole case so rounds chamber reliably in any gun, which is why it's the most popular choice for most handloaders. Neck sizing only touches the neck and can extend brass life slightly but may cause tight chambering over time. For a round often used in bolt guns and gas guns alike, the full length sizer is the versatile, dependable pick.




Reviews
There are no reviews yet.