Description
If you shoot the 300 Winchester Magnum and want your handloads to feed flawlessly, a quality sizing die is where good ammo starts. This Redding full length sizing die (part 91153) takes a fired case and reworks the entire thing, body, shoulder, and neck, so it drops back into SAAMI minimum dimensions. It handles decapping and neck expansion in the same pull of the handle, which keeps your process simple whether you're loading for a hunting rifle or a long range setup.
What the Redding 300 Win Mag Full Length Die Does
The die contains a decapping rod assembly with a neck expander, often called the size button. On the down stroke it resizes the case body and bumps the shoulder, knocks out the spent primer, and on the way back up the expander button opens the neck to the right inside diameter for seating a bullet. The result is brass that returns to a chamber of minimum SAAMI dimensions, so it fits any standard chamber regardless of your action type. That matters more on a belted magnum like the 300 Win Mag, where consistent shoulder bump keeps chambering smooth and brass life reasonable.
Build Quality Behind This Redding Sizing Die
Redding has been making handloading gear in the USA since 1946, and it shows in how these dies are cut. They use fine alloy steels, machine the bodies on Hardinge super-precision lathes to hold tight tolerances, then heat treat them in atmospherically controlled furnaces so they hold spec for the long haul. The interior is hand polished so it works the brass smoothly without chewing up your cases. It uses the industry standard 7/8-14 threaded body, so it threads right into any common single stage or progressive press from Redding, RCBS, Hornady, Lee, Lyman, and others.
This is the standard full length sizer sold individually. It's a great match if you already have a seating die or want to build a kit piece by piece, and it also shows up inside Redding's Full Length and Deluxe die sets. Keep in mind a shell holder is sold separately and sized to your press.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 91153
- UPC: 611760911538
- Cartridge: 300 Winchester Magnum
- Die Type: Full Length Sizing Die
- Material: Case Hardened Alloy Steel
- Thread: 7/8-14 Industry Standard
- Decapping: Includes decapping rod assembly
- Neck Expander: Includes expander (size button)
- Sizing: Resizes body, shoulder, and neck to SAAMI minimum
- Country of Origin: United States
What’s Included
- One Redding 300 Winchester Magnum full length sizing die
- Decapping rod assembly with neck expander (size button) installed
- Die box with instructions
Frequently Asked Questions
Does the Redding 300 Win Mag full length sizing die include a shell holder?
No, the shell holder is sold separately. Shell holders are sized to your specific press and cartridge rim, so you'll want to pick one that matches your setup. Many loaders already have the right one on hand from loading other cartridges with a similar rim.
What exactly does this die do to my brass?
It resizes the full case, including the body, shoulder, and neck, back to SAAMI minimum dimensions so it chambers cleanly. At the same time, it decaps the spent primer and the expander button sets the inside neck diameter for seating a bullet. That's the whole sizing step handled in one pull of the press handle.
Will this die fit my press?
Yes, it uses the industry standard 7/8-14 threaded body that fits nearly all single stage and progressive presses, including Redding, RCBS, Hornady, Lee, Lyman, and Dillon. Case lube is recommended when full length sizing bottleneck cases like the 300 Win Mag to keep things smooth and avoid stuck cases.
Is this the Type S bushing die?
No, this is Redding's standard full length sizing die, part number 91153. It uses a fixed expander button rather than interchangeable bushings. If you want to fine tune neck tension with bushings, that would be the separate Type S model, but for most hunting and general precision loading the standard die does the job well.



Reviews
There are no reviews yet.