0
0

Redding Pro Series 45 Colt/454 Casull Carbide 3-Die Set 89191

UPC: 611760891915

$123.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding's Pro Series Carbide 3-Die Set covers both 45 Colt and 454 Casull in one package, and it's set up specifically for folks running a progressive press. The headliner here is the NxGEN titanium carbide sizing die. Titanium carbide is about as hard as readily available carbide gets, and under a microscope the surface reads smooth and rounded rather than jagged. That slick, non-galling finish means you can skip the case lube entirely and your brass slides through the sizer without fuss, which keeps a progressive cycle moving clean.

What Sets the 45 Colt/454 Casull Pro Series Apart

This set is built different from a standard conventional three-die kit. Instead of an expander die, Redding leaves that step out because most popular progressive machines flare the case mouth right at the powder drop station. The seating die in this set has an oversized entry radius so cases and bullets feed in smoothly on a fast press, but that seater does not crimp on its own. Crimping gets handled by a dedicated crimp die included in the box, which is the better way to do it anyway since the cleanest crimp happens after the bullet is already seated.

Running the Pro Series Carbide Set on Your Press

The die bodies use the industry standard 7/8-14 thread, so they'll thread into any standard press station. While these were designed around progressive machines, they work just fine on a single stage or turret press too if you add a separate expander die for your case mouth flare. Whether you're loading cowboy action 45 Colt plinkers or working up heavy 454 Casull hunting loads, the carbide sizer and separate crimp setup give you repeatable, well-aligned ammo without the mess of lubing cases.

Redding has a long reputation for tight tolerances and quality machining, and this set carries that same reputation into a progressive-friendly package. A shellholder is sold separately, so grab the right one for your rim if you don't already have it on hand.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 89191
  • UPC: 611760891915
  • Caliber: 45 Colt / 454 Casull
  • Series: Pro Series
  • Die Style: 3-Die Set
  • Sizing Die Material: NxGEN Titanium Carbide
  • Thread: 7/8-14
  • Press Compatibility: Progressive (also single stage/turret with separate expander die)
  • Expander Die: Not included
  • Lube Required: No
  • Shellholder: Sold separately
  • Made In: USA

What’s Included

  • NxGEN Titanium Carbide Sizing/Decapping Die
  • Pro Series Seating Die with large entry radius (no crimp)
  • Separate Crimp Die (Profile or Taper Crimp)
  • Die box / storage package
  • Instructions

Frequently Asked Questions

Does this 45 Colt/454 Casull Pro Series set include an expander die?

No, it does not. Redding leaves the expander die out of the Pro Series because most popular progressive presses flare the case mouth at the powder drop station. If you plan to run this set on a single stage or turret press, you'll want to pick up a separate expander die.

Do I need to lube my cases with this carbide die set?

No. The titanium carbide sizing ring gives you lube-free sizing on straight-wall handgun brass. Your cases glide through the sizer and you skip the messy lube-and-clean step entirely.

Can I load both 45 Colt and 454 Casull with this set?

Yes, this single set handles both cartridges since they share the same case diameter. Just set your seating depth and crimp for the specific load you're building.

Is a shellholder included with the Pro Series die set?

No, the shellholder is sold separately. Make sure you have the correct shellholder for the 45 Colt/454 Casull rim before your first session on the press.

Additional information

UPC

611760891915

Manufacturer

Manufacturer Part Number

89191

Reviews

There are no reviews yet.

Be the first to review “Redding Pro Series 45 Colt/454 Casull Carbide 3-Die Set 89191”