Description
If you're loading 32 S&W Long on a progressive press, this Redding Pro Series set is purpose-built for exactly that kind of work. The heart of it is the NxGen carbide sizing die, which lets you resize brass without case lube and keeps every stroke smooth and consistent. That carbide ring also shrugs off wear, so this is the kind of tooling you set up once and run for years.
What Makes the Redding Pro Series 32 S&W Long Set Different
This is a Pro Series set, not a standard three-die kit, and that distinction matters. It ships with the NxGen carbide sizing die (NX-C), a dedicated PRO-ST seating die featuring a large entry radius for smooth bullet alignment, and a separate crimp die. There's no expander die in the box, and that's by design. Most popular progressive machines flare the case mouth right at the powder drop station, so Redding leaves it out to keep your toolhead efficient.
Running the 32 S&W Long / 32 H&R Magnum Carbide Dies
Splitting the seating and crimping into two separate operations is one of the reasons these produce such clean, square ammo. The oversized radius on the seating die guides bullets in without shaving or tipping, and the standalone crimp die lets you dial in a precise crimp without fighting bullet seating depth at the same time. These dies cover both 32 S&W Long and 32 H&R Magnum, and plenty of loaders run them for 327 Federal Magnum too since they share the same case family.
Built the Way Redding Builds Everything
Redding machines its dies on precision lathes to tight tolerances, uses quality alloy steels, and heat treats everything for a long service life. All of their dies use the industry-standard 7/8-14 threaded body, so this set drops right into your existing press and toolhead without any fuss. Feedback from folks running these on progressive setups consistently points to how smooth the sizing feels and how nicely the finished rounds turn out.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 89162
- UPC: 611760891625
- Series: Pro Series NxGen Carbide
- Caliber: 32 S&W Long / 32 H&R Magnum
- Die Type: 3-Die Set
- Sizing Die: NxGen Carbide (NX-C), lube-free
- Seating Die: PRO-ST with large entry radius, no crimp
- Crimp Die: Separate dedicated crimp die
- Expander Die: Not included (press handles flare at powder drop)
- Thread: 7/8-14 industry standard
- Bullet Diameter: 0.312
- Shellholder: #10 (sold separately)
- Intended Press: Progressive (works on single stage with separate expander)
What’s Included
- NxGen Carbide Sizing/Decapping Die (NX-C)
- PRO-ST Bullet Seating Die (large entry radius, no crimp)
- Dedicated Crimp Die
- Plastic storage case
Frequently Asked Questions
Does this Redding Pro Series 32 S&W Long set include an expander die?
No, and that's intentional for the Pro Series line. These sets are designed for progressive presses, which flare the case mouth at the powder drop station, so Redding leaves the expander out to keep your toolhead streamlined. If you want to run this set on a single stage press, you'll just need to add an expander die separately.
Will this die set work for 32 H&R Magnum and 327 Federal Magnum too?
Yes. The set is spec'd for both 32 S&W Long and 32 H&R Magnum, and many reloaders use it for 327 Federal Magnum as well since those cartridges share the same case family and bullet diameter. Just keep in mind you'll set your seating and crimp depth to match whichever case length you're loading.
Do I need case lube with these carbide dies?
No. The NxGen carbide sizing ring lets you size straight-wall 32 S&W Long brass without lube, which saves you the extra lube-and-wipe step and keeps your progressive running fast. A light pass is all it takes, and feedback from users running these consistently calls out how smooth the sizing feels.
Does this set come with a shellholder?
No, the shellholder is not included with the die set. For 32 S&W Long and 32 H&R Magnum you'll want a #10 shellholder, which you can pick up separately to match your press.




Reviews
There are no reviews yet.