Description
A taper crimp works differently than the roll crimp built into most standard seating dies, and that difference matters when you're loading .308 Winchester for semi-autos or bullets that don't have a crimp groove. Instead of rolling the case mouth into the bullet, this Redding die gently squeezes the neck tighter and tighter to grip the bullet in place. It adds extra tension without working the brass as hard as a roll crimp, and it won't change the overall length of your loaded round.
Why the Redding 308 Taper Crimp Die Earns a Spot on the Bench
If you've ever chased groups that open up because bullets are creeping under recoil or during feeding, this is the fix. Taper crimping gives your bullets that extra bit of grip so seating depth stays put round after round, which is exactly why handloaders reach for it when building ammo for gas guns and the AR-10 platform. Bullets without a cannelure, the ones you can't safely roll crimp, are right at home here.
Fit and Setup on the Redding Taper Crimp Die for 308 Win
This is a single crimp die, not a full set, and it threads into any standard 7/8-14 reloading press. Setup is straightforward: thread it down until you get the amount of crimp you want, then lock the ring and you're running. Redding machines these to tight tolerances, and the fit and finish reflect that. Folks who've run them tend to call out the clean machining and how predictable they are to dial in.
Built for Consistency
Redding has a long reputation among precision handloaders, and this die carries that standard. The whole point of a taper crimp is uniformity, giving every case mouth the same controlled grip so your ammo chambers smoothly and shoots the way your load data says it should. For anyone who takes their .308 reloads seriously, it's a small tool that makes a real difference downrange.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 85155
- UPC: 611760851551
- Caliber: .308 Winchester / 7.62x51mm
- Die Type: Taper Crimp Die (Bottleneck)
- Thread Size: 7/8-14
- Configuration: Single die
- Country of Manufacture: United States
What’s Included
- Redding Taper Crimp Die for .308 Winchester (85155)
Frequently Asked Questions
What's the difference between a taper crimp and a roll crimp on the 308 Win die?
A roll crimp curls the case mouth inward into the bullet, while a taper crimp gently squeezes the neck tighter and tighter to grip the bullet in place. The taper crimp doesn't work the brass as hard and doesn't affect the loaded cartridge's overall length. It's the preferred choice for bullets that don't have a cannelure, where a roll crimp isn't a good option.
Is the Redding 308 Taper Crimp Die a good choice for AR-10 and semi-auto loads?
Yes, this is a popular pick for gas guns and semi-autos. Taper crimping adds extra bullet grip so rounds hold their seating depth through hard feeding and recoil, which helps keep accuracy consistent. Many handloaders consider it a worthwhile step when building ammo for the AR-10 platform.
Does this die come as a set or just the single crimp die?
This is a single taper crimp die, not a complete die set. You'll still need your sizing and seating dies to load a full round. It threads into any standard 7/8-14 press and fits into your existing reloading setup.
Do I need to crimp my .308 reloads at all?
Not every load requires a crimp, especially bolt-action rounds with good neck tension. Crimping becomes more valuable for semi-autos and bullets without a cannelure, where you want extra insurance against bullet movement during feeding and recoil. If you're seeing seating depth drift or want maximum consistency, this die is a solid addition.


Reviews
There are no reviews yet.