Description
Neck sizing is one of those tricks that separates casual reloaders from folks chasing real precision, and Redding's 82446 set is built exactly for that job in 6.5 Creedmoor. Instead of working the full case body like a standard full-length die, the neck sizer only touches the neck of your fire-formed brass. That leaves the shoulder and body matched to your rifle's chamber, which cuts down on brass stretching, extends case life, and often shrinks your groups once everything settles in.
What Comes in the 6.5 Creedmoor Neck Die Set
This is a two-die set. You get a Neck Sizing Die fitted with a decapping rod assembly and neck expander button, plus a conventional Bullet Seating Die that includes a built-in bullet guide, a crimp ring, and the proper seating plug for the .264 diameter bullets the Creedmoor runs. It all ships in Redding's plastic storage box, which doubles as a loading block, and there's a spare decapping pin tucked inside too. The shellholder is sold separately, and the Creedmoor uses the standard #1.
Why Reloaders Reach for the Redding Neck Die
The appeal here is accuracy and brass longevity. Because you're only sizing the neck, the case holds its fit to one specific chamber, which a lot of bolt-gun owners swear improves consistency. Worth knowing going in: neck-sized brass is tuned to the rifle it was fired in, so it may not drop freely into a different 6.5 Creedmoor. You'll also want to full-length size now and then when the bolt starts to close hard, so pairing this set with a full-length die down the road isn't a bad plan.
Built the Redding Way
Redding machines these dies from quality alloy steel and heat treats them in atmospherically controlled furnaces for tight tolerances and smooth operation. The bodies use the industry-standard 7/8-14 thread, so they'll thread right into any common single-stage press. Made in the USA, they're the kind of tooling you buy once and hand down.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 82446
- UPC: 611760824463
- Cartridge: 6.5 Creedmoor
- Die Style: Neck Sizing
- Set Type: 2-Die Set (Neck Sizer + Bullet Seater)
- Bullet Diameter: .264
- Thread: 7/8-14
- Shellholder: #1 (sold separately)
- Material: Heat-Treated Alloy Steel
- Country of Origin: United States
What’s Included
- Neck Sizing Die with decapping rod assembly and neck expander button
- Bullet Seating Die with bullet guide, built-in crimp ring and seating plug
- Plastic storage box
- Spare decapping pin
Frequently Asked Questions
What is the difference between this neck sizing die set and a full-length die set?
A neck sizing die only resizes the case neck and leaves the body and shoulder matched to your rifle's chamber, while a full-length die works the entire case back down to spec. Neck sizing reduces brass stretching and can improve accuracy and case life. The tradeoff is that neck-sized brass is tuned to one specific chamber, so many reloaders keep a full-length die on hand as well.
Does the Redding 6.5 Creedmoor Neck Die Set include a shellholder?
No, the shellholder is sold separately, which is standard for Redding die sets. The 6.5 Creedmoor uses the Redding #1 shellholder. You'll need one before you can run brass through the dies.
Will cases neck-sized with this die chamber in a different 6.5 Creedmoor rifle?
Not reliably. Since only the neck is sized, the rest of the case stays fire-formed to the rifle it was shot in, so it may not drop freely into another gun chambered for the same cartridge. If you shoot the same brass across multiple rifles, a full-length die is the better fit for that brass.
Will this die set fit my reloading press?
Yes. Redding uses the industry-standard 7/8-14 threaded die body, so this set threads into any common single-stage reloading press. No special adapters are needed.




Reviews
There are no reviews yet.