Description
Redding built this .308 Winchester neck die set for the handloader who's dialing in a single rifle and wants to squeeze every bit of life out of their brass. Instead of working the whole case the way a full-length die does, the neck sizer touches only the neck. The body and shoulder stay fire-formed to your chamber, which is exactly what precision-minded bolt gun owners are after.
The set is a two-die package. The neck sizing die carries a decapping rod assembly with a neck expander button that knocks out the spent primer and sizes the inside of the neck in one stroke. The companion seating die is a conventional design with a bullet guide, built-in crimp ring, and the proper seating plug for .308, so you get consistent seating across a wide range of bullet profiles. Both dies use the standard 7/8-14 thread and drop right into any single-stage or progressive press.
Why the 308 Neck Die Set Stretches Your Brass
Because you're not pushing the shoulder back or ironing out the body with every cycle, the brass sees far less work hardening. Reloaders routinely report getting noticeably more firings out of neck-sized cases compared to full-length sizing. Keeping that fire-formed fit also helps the round chamber snug and square, which translates to tighter, more repeatable groups when the ammo stays with the rifle it was formed in.
Fit and Handling Notes for the 308 Neck Sizing Set
Keep in mind that neck-sized-only brass is tuned to your chamber, so cases sized this way may not drop freely into a different rifle chambered in .308. That's the trade-off, and it's the whole point. Give the necks a light touch of lube before sizing for smooth operation. Redding machines these dies to tight tolerances and hand-polishes the internals, so they run clean and should last a lifetime of loading.
The shellholder is sold separately. For .308 Win you'll want the #1 shellholder.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 82155
- UPC: 611760821554
- Cartridge: .308 Winchester
- Die Set Type: Neck Sizing 2-Die Set
- Dies Included: Neck Sizing Die, Seating Die
- Thread Size: 7/8-14
- Bullet Diameter: 0.308
- Material: Alloy steel, heat treated
- Shellholder: #1 (sold separately)
What’s Included
- Neck Sizing Die with decapping rod assembly and neck expander button
- Conventional Seating Die with bullet guide, built-in crimp ring, and seating plug
Frequently Asked Questions
What's the difference between this neck sizing die set and a full-length die set for 308 Win?
A full-length die resizes the entire case body, shoulder, and neck back toward factory dimensions. This Redding neck die set sizes only the neck and leaves the body and shoulder fire-formed to your chamber. That means less brass working, longer case life, and a tighter chamber fit for the rifle the brass was formed in.
Will brass sized with this die chamber in another 308 rifle?
Not reliably. Since the die sizes only the neck and leaves the body and shoulder in their fire-formed state, those cases are tailored to the chamber they were fired in. Keep neck-sized brass paired with the rifle it came from and use a full-length die if you need rounds that feed across multiple guns.
Is a shellholder included with the Redding 308 neck die set?
No, the shellholder is sold separately. For .308 Winchester you'll want the #1 shellholder. The set itself includes the neck sizing die and the seating die along with the decapping and expander hardware.
Do I still need to lube cases when neck sizing?
Yes, a light touch of lube on the case necks helps everything run smooth and keeps the expander button working cleanly. You don't need to go heavy since you're only working the neck, not the full body. A dry neck lube media works well here too.



Reviews
There are no reviews yet.