Description
The Redding Type S Bushing Full Length Die for 6mm BR Remington gives you full-length sizing with a level of neck control most standard dies just can't touch. Instead of a one-size-fits-all neck, it uses interchangeable bushings that let you decide exactly how much neck tension you want. You size the case body, set your shoulder bump, and control neck tension all in one pass, which is why this die lives on so many bench rest and precision loading setups.
What the 6mm BR Type S Bushing Die Does Differently
The magic here is the bushing system. Bushings are available in .001 inch increments and self-center in the die for better concentricity, so you can fine-tune neck tension to match your brass and your load. The die also features an adjustable decapping rod that lets you set how far the bushing travels down the neck, so you can size the full neck or leave a portion untouched if that's what your rifle likes.
Flexibility Built Into the Type S Full Length Die
This die ships with both a standard size button and a decapping pin retainer. If you turn your necks for uniformity, you can run the retainer and skip the expander button entirely, letting the bushing do all the neck work. And if you ever just need to bump a shoulder or work a case body, you can pull the bushing and internal parts and run it as a body die. That kind of versatility out of a single tool is tough to beat.
Fit and Setup for the 6mm BR Shooter
The die uses a standard 7/8-14 thread, so it threads into virtually any single-stage or turret press you've got on the bench. Keep in mind the bushings and shellholder are sold separately, so grab the bushing size that matches your brass neck measurement before your first session. Built in the USA with the fit and finish Redding is known for, this is a die you set up once and trust for the long haul.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 77317
- UPC: 611760773174
- Cartridge: 6mm BR Remington
- Die Style: Type S Bushing Full Length Sizing
- Bullet Diameter: 0.243
- Thread Size: 7/8-14
- Bushing Increments: .001 inch
- Shellholder: #1 (sold separately)
- Country of Manufacture: United States
What’s Included
- Type S Bushing Full Length Sizing Die
- Adjustable decapping rod
- Standard size button
- Decapping pin retainer
- Die box with instructions
Frequently Asked Questions
Do the bushings come with the Type S Bushing Full Length Die?
No, the die is supplied without bushings. You'll want to measure your sized brass neck and order the correct bushing separately in .001 inch increments. The shellholder is also sold separately, so plan on picking up a #1 shellholder for 6mm BR.
Can the 6mm BR Type S die be used as a body die?
Yes. By removing the bushing and the internal parts, this die will work as a body die for sizing the case body and bumping the shoulder without touching the neck. It's a handy bit of versatility that lets one die cover more than one job on your bench.
What press does this Redding die fit?
The die uses a standard 7/8-14 thread, so it fits virtually any single-stage, turret, or progressive press on the market. Setup is straightforward, and the adjustable decapping rod lets you fine-tune bushing position for how much of the neck you want to size.
Why would I choose the bushing style over a standard full length sizing die?
The bushing system lets you control neck tension precisely by swapping bushings, which standard dies don't allow. That control helps with consistency and case life, and it's a big reason precision and bench rest reloaders favor the Type S line. If you turn your necks, you can run the decapping pin retainer and let the bushing handle all the neck work.





Reviews
There are no reviews yet.