Description
If you're loading for the 7mm Remington Short Action Ultra Mag and chasing tighter groups, the neck is where a lot of accuracy lives or dies. This Redding Type S Bushing Full Length Sizing Die handles the whole job in one stroke, resizing the case body, bumping the shoulder back, and sizing the neck with an interchangeable bushing you pick for your exact brass. That means you set the neck tension yourself instead of accepting whatever a fixed expander gives you.
How the 7mm SAUM Type S Die Earns Its Keep
The heart of this die is the bushing system. Bushings are sold in .001-inch increments, so you measure the loaded neck diameter of your cartridge, subtract a thousandth or two for proper tension, and drop in the matching bushing. Because the bushing floats and self-centers on the case neck, concentricity comes out cleaner than a traditional sizing button can manage. The die accepts Redding bushings along with Hornady, RCBS, and Wilson bushings, which gives you flexibility if you already have a drawer full of them.
Dialing In Neck Tension With the Bushing Full Length Die
The adjustable decapping rod lets you raise or lower the bushing position, so you can size only part of the neck length when that suits your load. Every Type S die comes with both the standard size button and a decapping pin retainer, letting you run it with the expander or go bushing-only for the straightest necks possible. Pull the bushing and the internal parts entirely and the die doubles as a body die, which is a handy trick for load development or working fired brass.
What to Know Before You Load
Keep in mind this is a single sizing die, not a full set, and bushings and a shellholder are purchased separately. The body threads to the standard 7/8-14 so it drops right into any common single-stage or turret press. For precision-minded handloaders who want real control over fit and tension, this is the kind of tool that pays you back in consistency down range.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 77280
- UPC: 611760772801
- Cartridge: 7mm Rem SAUM (Remington SA Ultra Mag)
- Die Style: Type S Bushing Full Length Sizing Die
- Number of Dies: 1
- Thread Size: 7/8-14
- Bushing Increments: .001 inch
- Bushing Compatibility: Redding, Hornady, RCBS, Wilson
- Bushings Included: No
- Shellholder Included: No
- Country of Origin: USA
What’s Included
- One Redding Type S Bushing Full Length Sizing Die
- Decapping rod assembly
- Standard size button (expander)
- Decapping pin retainer for bushing-only sizing
Frequently Asked Questions
Does the 7mm SAUM Type S die come with bushings?
No, bushings are sold separately so you can match the exact neck tension your brass needs. You measure the loaded neck diameter, subtract a thousandth or two, and order the bushing that matches. The die accepts Redding, Hornady, RCBS, and Wilson bushings in .001-inch increments.
Is a shellholder included with this die?
No, a shellholder is not included and will need to be purchased separately. You'll want the shellholder sized for the 7mm Rem SAUM case head, which shares the same head diameter as other short action ultra mag cartridges. Match it to your press and you're set.
Can this Type S bushing die be used as a body die?
Yes. By removing the bushing and all of the internal parts, the Type S full length die works as a body die that sizes the case body and bumps the shoulder without touching the neck. It's a useful option for load work and dealing with fired brass.
What does the standard size button and decapping pin retainer do?
The standard size button is the traditional expander that sets final neck sizing from the inside as the case is drawn out. If you'd rather control neck tension entirely with the bushing for the straightest necks, you swap in the included decapping pin retainer and skip the button. Both come with the die so you can run it either way.




Reviews
There are no reviews yet.