Description
The Redding Type S Bushing Full Length Sizing Die handles your 300 Winchester Short Magnum brass the smart way. In one pass it sizes the case body, bumps the shoulder back for reliable chambering, and sizes the neck using an interchangeable bushing of your choosing. That bushing is the whole point here. Instead of a fixed die that squeezes the neck down undersized and then drags it back over an expander ball, you pick the exact bushing diameter you want and size the neck only as much as needed. Less working of the brass means longer case life and better concentricity.
What the 300 WSM Type S Die Does Differently
Redding offers bushings in .001 inch increments, so you can tune neck tension to the brass and bullet combo you're running. The general approach is to measure the outside neck diameter of a loaded round and subtract .001 to .002 inch to account for spring back. The bushing self centers on the case neck as it sizes, which is a big part of why these dies produce such straight, consistent necks. A lot of handloaders start with a couple of bushings bracketing their target number so they can experiment with tension during load development.
Set Up Flexibility With the Type S Full Length Bushing Die
The adjustable decapping rod lets you position the bushing to size only part of the neck length if you prefer. It ships with the standard size button on the decapping rod, which is handy if you're running commercial brass as is. For those who sort or turn their necks for uniformity, the included decapping pin retainer lets you remove the size button and let the bushing do all the work on the outside of the neck. One more trick worth knowing: pull the bushing and the internal parts and this die functions as a body die for cases that have gotten tight to chamber.
This is a single full length sizing die built from case hardened steel and finished to the standard Redding reputation is known for. Pair it with a seating die and the right shell holder and you've got a precision reloading setup for your short magnum.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 77223
- UPC: 611760772238
- Caliber: 300 Winchester Short Magnum (300 WSM)
- Die Type: Type S Bushing Full Length Sizing Die
- Material: Case Hardened Steel
- Thread: 7/8-14
- Bushing Increments: .001 inch
- Decapping Rod: Adjustable, with standard size button
- Doubles As: Body die when bushing and internals are removed
What’s Included
- Type S Full Length Bushing Sizing Die
- Adjustable decapping rod with standard size button
- Decapping pin retainer
- Plastic storage case
Frequently Asked Questions
Does the 300 WSM Type S die come with bushings?
No, all Redding Type S dies are supplied without bushings. You select and purchase the bushing diameter separately based on your brass and desired neck tension. Redding offers them in .001 inch increments in heat treated steel or titanium nitride coated.
How do I pick the right bushing for this die?
Measure the outside neck diameter of a loaded round with a precision caliper or micrometer, then subtract about .001 to .002 inch to allow for brass spring back. That gives you your starting bushing size. Many reloaders buy a bushing above and below that number so they can fine tune neck tension during load development.
Can the Type S full length die be used as a body die?
Yes. If you remove the bushing and all the internal parts, this die will resize the case body and bump the shoulder without touching the neck, which is exactly what a body die does. It's a nice bit of versatility built into one tool.
What's the advantage over a standard full length die?
A standard die sizes the neck undersized and then pulls it back over an expander ball, which works the brass hard and can hurt concentricity. The bushing sizes the neck to the exact diameter you choose in a single step, so there's far less reshaping. That means straighter necks, more consistent neck tension, and longer case life.





Reviews
There are no reviews yet.